![[LWN Logo]](/images/lwn.banner.gif)
From: rodgersg@us.ibm.com
Subject: [ANNOUNCE] Linux boots on early POWER4 hardware
To: linuxppc-announce@lists.linuxppc.org, linux-kernel@vger.rutgers.edu
Date: Mon, 5 Jun 2000 14:03:19 -0500
The following is one of the original boot logs for Linux on a POWER4
microprocessor. Linux was ported to POWER4 at an IBM Lab in Austin Texas
with the help of Paul Mackerras from Linuxcare. The port was done with
pre-production hardware. As such, we are not showing BogoMIPS numbers at
this time. General availability of POWER4 systems is expected in the
second half of 2001.
Regards,
Greg Rodgers, IBM Advanced CEC Engineering
Tom Gall, IBM Linux Technolgy Center
Mayan Moudgill, IBM Research
Milton Miller II, IBM Regatta Lab
------------------------------------------------------------------------------------------------------------------------------------------------
0 > setenv boot-file root=/dev/sda2 ok
0 > boot
BOOTP R = 1
BOOTP S = 1
FILE: /tftpboot/zImage.power4
Load Addr=0x4000 Max Size=0xbfc000
FINAL Packet Count = 1798
FINAL File Size = 920176 bytes.
Elapsed time since release of system processors: 6 mins 18 secs
chrpboot starting: loaded at 0x400000
gunzipping (0x10000 <- 0x415e78:0x4df7c8)...done 2131832 bytes
start address = 0x10000
instantiating rtas at 00600000 ... done
copying OF device tree...done
returning from prom_init
Total memory = 256MB; using 4096kB for hash table (at c0800000)
Linux version 2.3.99-pre9 (paulus@bubp15.austin.ibm.com) (gcc version
2.95.2 19991024 (release/franzo)) #147 Tue May 30 15:54:28 CDT 2000
Boot arguments: root=/dev/sda2
kmem_alloc: NULL ptr (name=unknown)
kmem_alloc: NULL ptr (name=unknown)
kmem_alloc: NULL ptr (name=unknown)
kmem_alloc: NULL ptr (name=unknown)
kmem_alloc: NULL ptr (name=unknown)
kmem_alloc: NULL ptr (name=unknown)
RTAS Event Scan Rate: 1 (XXXXX jiffies)
On node 0 totalpages: 65536
zone(0): 65536 pages.
zone(1): 0 pages.
zone(2): 0 pages
time_init: decrementer frequency = XXXXXXXXXXX/XX (XXX MHz)
Calibrating delay loop... XXXX.XX BogoMIPS
Memory: 250312k available (1312k kernel code, 800k data, 252k init)
[c0000000,d0000000]
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
kmem_create: Poisoning requested, but con given - bdev_cache
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
kmem_create: Poisoning requested, but con given - inode_cache
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
PCI: Address space collision on region 0 of device Symphony Labs SL82c105
PCI: Address space collision on region 1 of device Symphony Labs SL82c105
PCI: Address space collision on region 2 of device Symphony Labs SL82c105
PCI: Address space collision on region 3 of device Symphony Labs SL82c105
PCI: Address space collision on region 0 of device Symbios Logic Inc.
(formerly NCR) 53c896
PCI: Address space collision on region 1 of device Symbios Logic Inc.
(formerly NCR) 53c896
PCI: Address space collision on region 3 of device Symbios Logic Inc.
(formerly NCR) 53c896
PCI: Address space collision on region 6 of device Symbios Logic Inc.
(formerly NCR) 53c896
PCI: Address space collision on region 0 of device Symbios Logic Inc.
(formerly NCR) 53c896 (#2)
PCI: Address space collision on region 1 of device Symbios Logic Inc.
(formerly NCR) 53c896 (#2)
PCI: Address space collision on region 3 of device Symbios Logic Inc.
(formerly NCR) 53c896 (#2)
PCI: Address space collision on region 6 of device Symbios Logic Inc.
(formerly NCR) 53c896 (#2)
Don't know how to access NVRAM with 0 addresses
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
kmem_create: Poisoning requested, but con given - skbuff_head_cache
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Starting kswapd v1.6
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
sym53c8xx: at PCI bus 7, device 1, function 0
sym53c8xx: setting PCI_COMMAND_IO PCI_COMMAND_MEMORY...
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: setting PCI_COMMAND_INVALIDATE (fix-up)
sym53c8xx: 53c896 detected
sym53c8xx: at PCI bus 7, device 1, function 1
sym53c8xx: setting PCI_COMMAND_IO PCI_COMMAND_MEMORY...
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: setting PCI_COMMAND_INVALIDATE (fix-up)
sym53c8xx: 53c896 detected
sym53c8xx: at PCI bus 30, device 12, function 0
sym53c8xx: setting PCI_COMMAND_IO PCI_COMMAND_MEMORY...
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: setting PCI_COMMAND_INVALIDATE (fix-up)
sym53c8xx: 53c896 detected
sym53c8xx: at PCI bus 30, device 12, function 1
sym53c8xx: setting PCI_COMMAND_IO PCI_COMMAND_MEMORY...
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: setting PCI_COMMAND_INVALIDATE (fix-up)
sym53c8xx: 53c896 detected
sym53c896-0: rev 0x6 on pci bus 7 device 1 function 0 irq 54
sym53c896-0: ID 7, Fast-40, Parity Checking
sym53c896-0: on-chip RAM at 0x98042000
sym53c896-0: restart (scsi reset).
sym53c896-0: handling phase mismatch from SCRIPTS.
sym53c896-0: Downloading SCSI SCRIPTS.
sym53c896-1: rev 0x6 on pci bus 7 device 1 function 1 irq 54
sym53c896-1: ID 7, Fast-40, Parity Checking
sym53c896-1: on-chip RAM at 0x98040000
sym53c896-1: restart (scsi reset).
sym53c896-1: handling phase mismatch from SCRIPTS.
sym53c896-1: Downloading SCSI SCRIPTS.
sym53c896-2: rev 0x7 on pci bus 30 device 12 function 0 irq 81
sym53c896-2: ID 7, Fast-40, Parity Checking
sym53c896-2: on-chip RAM at 0xfbef4000
sym53c896-2: restart (scsi reset).
sym53c896-2: handling phase mismatch from SCRIPTS.
sym53c896-2: Downloading SCSI SCRIPTS.
sym53c896-3: rev 0x7 on pci bus 30 device 12 function 1 irq 82
sym53c896-3: ID 7, Fast-40, Parity Checking
sym53c896-3: on-chip RAM at 0xfbef6000
sym53c896-3: restart (scsi reset).
sym53c896-3: handling phase mismatch from SCRIPTS.
sym53c896-3: Downloading SCSI SCRIPTS.
ncr53c8xx: at PCI bus 7, device 1, function 0
ncr53c8xx: IO region 0x4e800[0..127] is in use
ncr53c8xx: at PCI bus 7, device 1, function 1
ncr53c8xx: IO region 0x4ec00[0..127] is in use
ncr53c8xx: at PCI bus 30, device 12, function 0
ncr53c8xx: IO region 0xfffff800[0..127] is in use
ncr53c8xx: at PCI bus 30, device 12, function 1
ncr53c8xx: IO region 0xfffffc00[0..127] is in use
scsi0 : sym53c8xx - version 1.5m
scsi1 : sym53c8xx - version 1.5m
scsi2 : sym53c8xx - version 1.5m
scsi3 : sym53c8xx - version 1.5m
scsi : 4 hosts.
sym53c896-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS09D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
sym53c896-0-<2,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
sym53c896-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS09D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdc at scsi0, channel 0, id 8, lun 0
sym53c896-0-<10,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdd at scsi0, channel 0, id 10, lun 0
sym53c896-0-<11,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sde at scsi0, channel 0, id 11, lun 0
sym53c896-0-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdf at scsi0, channel 0, id 12, lun 0
Vendor: IBM Model: HSBP X0 Oyster Rev: B008
Type: Enclosure ANSI SCSI revision: 02
Detected scsi generic sg6 at scsi0, channel 0, id 15, lun 0, type 13
sym53c896-0-<0,0>: tagged command queue depth set to 8
sym53c896-0-<2,0>: tagged command queue depth set to 8
sym53c896-0-<8,0>: tagged command queue depth set to 8
sym53c896-0-<10,0>: tagged command queue depth set to 8
sym53c896-0-<11,0>: tagged command queue depth set to 8
sym53c896-0-<12,0>: tagged command queue depth set to 8
Vendor: IBM Model: CDRM00203 !K Rev: 1_02
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi2, channel 0, id 1, lun 0
Vendor: IBM Model: DNES-318350W Rev: SAG0
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdg at scsi2, channel 0, id 4, lun 0
Vendor: IBM Model: DNES-318350W Rev: SAG0
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdh at scsi2, channel 0, id 8, lun 0
sym53c896-2-<4,0>: tagged command queue depth set to 8
sym53c896-2-<8,0>: tagged command queue depth set to 8
sym53c896-3-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdi at scsi3, channel 0, id 0, lun 0
sym53c896-3-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdj at scsi3, channel 0, id 1, lun 0
sym53c896-3-<2,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdk at scsi3, channel 0, id 2, lun 0
sym53c896-3-<3,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdl at scsi3, channel 0, id 3, lun 0
sym53c896-3-<4,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdm at scsi3, channel 0, id 4, lun 0
sym53c896-3-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 0
Detected scsi disk sdn at scsi3, channel 0, id 9, lun 0
sym53c896-3-<10,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdo at scsi3, channel 0, id 10, lun 0
sym53c896-3-<11,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdp at scsi3, channel 0, id 11, lun 0
sym53c896-3-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: IBM Model: DRVS18D Rev: 0370
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdq at scsi3, channel 0, id 12, lun 0
Vendor: IBM Model: 2104-DL1 Rev: BP15
Type: Enclosure ANSI SCSI revision: 03
Detected scsi generic sg19 at scsi3, channel 0, id 15, lun 0, type 13
sym53c896-3-<0,0>: tagged command queue depth set to 8
sym53c896-3-<1,0>: tagged command queue depth set to 8
sym53c896-3-<2,0>: tagged command queue depth set to 8
sym53c896-3-<3,0>: tagged command queue depth set to 8
sym53c896-3-<4,0>: tagged command queue depth set to 8
sym53c896-3-<9,0>: tagged command queue depth set to 8
sym53c896-3-<10,0>: tagged command queue depth set to 8
sym53c896-3-<11,0>: tagged command queue depth set to 8
sym53c896-3-<12,0>: tagged command queue depth set to 8
scsi : detected 1 SCSI cdrom 17 SCSI disks total.
sym53c896-2-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
Uniform CD-ROM driver Revision: 3.08
sym53c896-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17774160 [8678 MB] [8.7
GB]
Partition check:
sda: sda1 sda2 sda3
sym53c896-0-<2,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdb: unknown partition table
sym53c896-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 17928698 [8754 MB] [8.8
GB]
sdc: unknown partition table
sym53c896-0-<10,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdd: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdd: unknown partition table
sym53c896-0-<11,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sde: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sde: unknown partition table
sym53c896-0-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdf: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdf: unknown partition table
SCSI device sdg: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdg: sdg2 sdg3 sdg4
SCSI device sdh: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdh: unknown partition table
sym53c896-3-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdi: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdi: unknown partition table
sym53c896-3-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdj: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdj: unknown partition table
sym53c896-3-<2,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdk: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdk: unknown partition table
sym53c896-3-<3,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdl: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdl: unknown partition table
sym53c896-3-<4,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdm: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdm: unknown partition table
sym53c896-3-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdn: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdn: unknown partition table
sym53c896-3-<10,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdo: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdo: unknown partition table
sym53c896-3-<11,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdp: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdp: unknown partition table
sym53c896-3-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdq: hdwr sector= 512 bytes. Sectors= 35548320 [17357 MB] [17.4
GB]
sdq: unknown partition table
Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pcnet32_probe_pci: found device 0x001022.0x002000
ioaddr=0xfffff400 resource_flags=0x000101
PCI: Enabling device 1e:0b.0 (0000 -> 0003)
eth0: PCnet/FAST 79C971 at 0xfffff400,<6> 00<6> 04<6> ac<6> 57<6> 06<6>
31<6>
tx_start_pt(0x0c00):<6>~220 bytes,<6> BCR18(68e2):<6>BurstWrEn
<6>BurstRdEn <6>DWordIO <6>NoUFlow <6>
SRAMSIZE=0x7f00,<6> SRAM_BND=0x4000,<6>pcnet32: pcnet32_private
lp=c116d000 lp_dma_addr=0x116d000
assigned IRQ 80.
<6>Macintosh non-volatile memory driver v1.0
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 9.3.197.168, my address is 9.3.197.107
kmem_create: Forcing size word alignment - nfs_fh
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 252k init 32k prep 8k pmac
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.78 booting
Welcome to Yellow Dog Linux
Press 'I' to enter interactive startup.
Mounting proc filesystem [ OK ]
Configuring kernel parameters [ OK ]
Loading default keymapmodprobe: modprobe: Can't locate module char-major-4
/etc/rc.d/rc.sysinit: /dev/tty0: No such device
[FAILED]
Activating swap partitions [ OK ]
Setting hostname bu27b.austin.ibm.com [ OK ]
Checking root filesystem
/dev/sda2 was not cleanly unmounted, check forced.
/dev/sda2: Entry 'inetd.pid' in /var/run (407418) has deleted/unused inode
408567. CLEARED.
/dev/sda2: Entry 'klogd.pid' in /var/run (407418) has deleted/unused inode
408568. CLEARED.
/dev/sda2: Entry 'random-seed' in /var/run (407418) has deleted/unused
inode 408569. CLEARED.
/dev/sda2: Entry 'runlevel.dir' in /var/run (407418) has deleted/unused
inode 408570. CLEARED.
/dev/sda2: Entry 'sendmail.pid' in /var/run (407418) has deleted/unused
inode 408571. CLEARED.
/dev/sda2: Entry 'syslogd.pid' in /var/run (407418) has deleted/unused
inode 408572. CLEARED.
/dev/sda2: Entry 'utmp' in /var/run (407418) has deleted/unused inode
408573. CLEARED.
/dev/sda2: 79683/1075008 files (0.1% non-contiguous), 344077/2148096 blocks
[/sbin/fsck.ext2 -- /] fsck.ext2 -a /dev/sda2
[PASSED]
Remounting root filesystem in read-write mode [ OK ]
Finding module dependencies [ OK ]
Checking filesystems
Checking all file systems.[ OK ]
Mounting local filesystems [ OK ]
Turning on user and group quotas for local filesystems [ OK ]
/etc/rc.d/rc.sysinit: -u: command not found
Setting clock (utc): [ OK ]
Enabling swap space [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Bringing up interface lo [ OK ]
Bringing up interface eth0 [ OK ]
Starting portmapper: [ OK ]
Starting NFS file locking services:
Starting NFS lockd: lockdsvc: Function not implemented
[FAILED]
Starting NFS statd: [ OK ]
Initializing random number generator [ OK ]
Mounting other filesystems [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting identd: [ OK ]
Starting at daemon: [ OK ]
Starting cron daemon: [ OK ]
Starting INET services: [ OK ]
Starting lpd: [ OK ]
Starting NFS services: [ OK ]
Starting NFS quotas: [ OK ]
Starting NFS mountd: [ OK ]
Starting NFS daemon: nfssvc: Function not implemented
[FAILED]
Starting dhcpd: Internet Software Consortium DHCP Server 2.0
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
socket: Protocol not available - make sure CONFIG_PACKET and CONFIG_FILTER
are defined in your kernel configuration!
exiting.
[FAILED]
Starting keytable [ OK ]
Starting sendmail: [ OK ]
Starting console mouse services: (no mouse is configured)
Starting httpd: [ OK ]
Starting X Font Server: [ OK ]
Starting linuxconf [ OK ]
INIT: no more processes left in this runlevel
Welcome to Yellow Dog Linux!
Champion Server release 1.2 (ttyS0)
bu27b login:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/