![[LWN Logo]](/images/lcorner.png) |
|
![[LWN.net]](/images/Included.png) |
From: Martin Dalecki <dalecki@evision-ventures.com>
To: torvalds@transmeta.com
Subject: [PATCH] 2.5.6-pre2 IDE cleanup 16
Date: Tue, 05 Mar 2002 11:51:58 +0100
Cc: linux-kernel@vger.kernel.org
There is no such a thing like a ide-clean-15. Never was. But here comes
what has been done in ide-clean-16:
- Apply a patch for the initialization of the second PIIX channel.
Found by Daniel Quinlan <quinlan@transmeta.com>
- Apply a patch for the DMA initialization of the serverworks chip.
Ken Brownfield <brownfld@irridia.com>
- Make the ata_operations methods immune against device type drivers,
which donot provide them by separating the access to them out. Audit
them all.
- Resynchronize with 2.5.6-pre1.
- Remove unused IDE_DRIVE_CMD, IDE_DRIVE_TASK, IDE_DRIVE_TASK_MASK,
IDE_DRIVE_TASKFILE macros.
- Disable configuration of the task file stuff. It is going to go away
and will be replaced by a truly abstract interface based on
functionality and *not* direct mess-up of hardware.
- Resync with 2.5.6-pre2.
- Add HPT entries to the fall-back list, since otherwise the driver
won'trecognize the drives. We will have to make this the default
behavior for allnot recognized host chip types.
- Fix compilation with no PCI host chip support enabled.
- Apply the overflow fixes for HPT366 by Vojtech Pavlik.
- Kill the one-shoot functions ide_wait_cmd_taks() ide_wait_cmd() by
moving them to the places where they are actually used. Fix a
potential buffer overflow on the way.
- Fix usage of ide.c as module. Thanks to Adam J. Richter for figuring
out what was wrong.
- Various cleanups all along as well as removal of TONS of
unfinished/dead code.
I think it's sometimes better to remove stuff, which isn't there,
instead of hoping for a "magical day" where it will be finished.
I intend to kill the largely overdesigned taskfile stuff. It's broken
by design to provide this micro level of device access to *anybody*.
Operating systems should try to present the functionality of devices
in a convenient way to the user and not just mapp it directly to
user space.
diff -ur linux-2.5.5/arch/alpha/defconfig linux/arch/alpha/defconfig
--- linux-2.5.5/arch/alpha/defconfig Wed Feb 20 03:11:03 2002
+++ linux/arch/alpha/defconfig Mon Mar 4 02:50:08 2002
@@ -237,7 +237,6 @@
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
diff -ur linux-2.5.5/arch/arm/def-configs/shannon linux/arch/arm/def-configs/shannon
--- linux-2.5.5/arch/arm/def-configs/shannon Wed Feb 20 03:10:55 2002
+++ linux/arch/arm/def-configs/shannon Mon Mar 4 02:50:08 2002
@@ -378,7 +378,6 @@
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
diff -ur linux-2.5.5/arch/i386/defconfig linux/arch/i386/defconfig
--- linux-2.5.5/arch/i386/defconfig Mon Mar 4 21:07:14 2002
+++ linux/arch/i386/defconfig Mon Mar 4 02:50:08 2002
@@ -239,7 +239,6 @@
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
-CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
diff -ur linux-2.5.5/arch/sparc64/defconfig linux/arch/sparc64/defconfig
--- linux-2.5.5/arch/sparc64/defconfig Wed Feb 20 03:11:00 2002
+++ linux/arch/sparc64/defconfig Mon Mar 4 02:50:08 2002
@@ -273,7 +273,6 @@
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
diff -ur linux-2.5.5/arch/x86_64/defconfig linux/arch/x86_64/defconfig
--- linux-2.5.5/arch/x86_64/defconfig Mon Mar 4 21:07:14 2002
+++ linux/arch/x86_64/defconfig Mon Mar 4 02:50:08 2002
@@ -188,7 +188,6 @@
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
diff -ur linux-2.5.5/drivers/ide/Config.help linux/drivers/ide/Config.help
--- linux-2.5.5/drivers/ide/Config.help Wed Feb 20 03:11:04 2002
+++ linux/drivers/ide/Config.help Mon Mar 4 02:50:08 2002
@@ -807,14 +807,6 @@
If you are unsure, say N here.
-CONFIG_IDE_TASK_IOCTL
- This is a direct raw access to the media. It is a complex but
- elegant solution to test and validate the domain of the hardware and
- perform below the driver data recovery if needed. This is the most
- basic form of media-forensics.
-
- If you are unsure, say N here.
-
CONFIG_BLK_DEV_IDEDMA_FORCED
This is an old piece of lost code from Linux 2.0 Kernels.
diff -ur linux-2.5.5/drivers/ide/Config.in linux/drivers/ide/Config.in
--- linux-2.5.5/drivers/ide/Config.in Wed Feb 20 03:11:05 2002
+++ linux/drivers/ide/Config.in Mon Mar 4 02:50:08 2002
@@ -33,9 +33,7 @@
dep_tristate ' Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE
dep_tristate ' SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI
- bool ' IDE Taskfile Access' CONFIG_IDE_TASK_IOCTL
-
- comment 'IDE chipset support/bugfixes'
+ comment 'IDE chipset support'
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
dep_bool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
diff -ur linux-2.5.5/drivers/ide/hpt366.c linux/drivers/ide/hpt366.c
--- linux-2.5.5/drivers/ide/hpt366.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/hpt366.c Mon Mar 4 13:07:07 2002
@@ -374,7 +374,8 @@
class_rev &= 0xff;
p += sprintf(p, "\nController: %d\n", i);
- p += sprintf(p, "Chipset: HPT%s\n", chipset_nums[class_rev]);
+ p += sprintf(p, "Chipset: HPT%s\n",
+ class_rev < sizeof(chipset_nums) / sizeof(char *) ? chipset_nums[class_rev] : "???");
p += sprintf(p, "--------------- Primary Channel "
"--------------- Secondary Channel "
"--------------\n");
@@ -1119,12 +1120,11 @@
if (test != 0x08)
pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
- if (pci_rev_check_hpt3xx(dev)) {
+ if (pci_rev_check_hpt3xx(dev))
init_hpt370(dev);
+
+ if (n_hpt_devs < HPT366_MAX_DEVS)
hpt_devs[n_hpt_devs++] = dev;
- } else {
- hpt_devs[n_hpt_devs++] = dev;
- }
#if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
if (!hpt366_proc) {
diff -ur linux-2.5.5/drivers/ide/ide-cd.c linux/drivers/ide/ide-cd.c
--- linux-2.5.5/drivers/ide/ide-cd.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/ide-cd.c Mon Mar 4 02:50:08 2002
@@ -2906,69 +2906,29 @@
return 0;
}
-static int ide_cdrom_reinit (ide_drive_t *drive);
-
static struct ata_operations ide_cdrom_driver = {
owner: THIS_MODULE,
cleanup: ide_cdrom_cleanup,
standby: NULL,
- flushcache: NULL,
do_request: ide_do_rw_cdrom,
end_request: NULL,
ioctl: ide_cdrom_ioctl,
open: ide_cdrom_open,
release: ide_cdrom_release,
- media_change: ide_cdrom_check_media_change,
+ check_media_change: ide_cdrom_check_media_change,
revalidate: ide_cdrom_revalidate,
pre_reset: NULL,
capacity: ide_cdrom_capacity,
special: NULL,
- proc: NULL,
- driver_reinit: ide_cdrom_reinit,
+ proc: NULL
};
/* options */
-char *ignore = NULL;
+static char *ignore = NULL;
MODULE_PARM(ignore, "s");
MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
-static int ide_cdrom_reinit (ide_drive_t *drive)
-{
- struct cdrom_info *info;
- int failed = 0;
-
- MOD_INC_USE_COUNT;
- info = (struct cdrom_info *) kmalloc (sizeof (struct cdrom_info), GFP_KERNEL);
- if (info == NULL) {
- printk ("%s: Can't allocate a cdrom structure\n", drive->name);
- return 1;
- }
- if (ide_register_subdriver (drive, &ide_cdrom_driver)) {
- printk ("%s: Failed to register the driver with ide.c\n", drive->name);
- kfree (info);
- return 1;
- }
- memset (info, 0, sizeof (struct cdrom_info));
- drive->driver_data = info;
-
- /* ATA-PATTERN */
- ata_ops(drive)->busy++;
- if (ide_cdrom_setup (drive)) {
- ata_ops(drive)->busy--;
- if (ide_cdrom_cleanup (drive))
- printk ("%s: ide_cdrom_cleanup failed in ide_cdrom_init\n", drive->name);
- return 1;
- }
- ata_ops(drive)->busy--;
-
- failed--;
-
- revalidate_drives();
- MOD_DEC_USE_COUNT;
- return 0;
-}
-
static void __exit ide_cdrom_exit(void)
{
ide_drive_t *drive;
@@ -2980,7 +2940,7 @@
failed++;
}
}
-
+
int ide_cdrom_init(void)
{
ide_drive_t *drive;
diff -ur linux-2.5.5/drivers/ide/ide-disk.c linux/drivers/ide/ide-disk.c
--- linux-2.5.5/drivers/ide/ide-disk.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/ide-disk.c Mon Mar 4 02:50:08 2002
@@ -351,7 +351,19 @@
return 0;
}
-static int do_idedisk_flushcache(ide_drive_t *drive);
+static int idedisk_flushcache(ide_drive_t *drive)
+{
+ struct hd_drive_task_hdr taskfile;
+ struct hd_drive_hob_hdr hobfile;
+ memset(&taskfile, 0, sizeof(struct hd_drive_task_hdr));
+ memset(&hobfile, 0, sizeof(struct hd_drive_hob_hdr));
+ if (drive->id->cfs_enable_2 & 0x2400) {
+ taskfile.command = WIN_FLUSH_CACHE_EXT;
+ } else {
+ taskfile.command = WIN_FLUSH_CACHE;
+ }
+ return ide_wait_taskfile(drive, &taskfile, &hobfile, NULL);
+}
static void idedisk_release (struct inode *inode, struct file *filp, ide_drive_t *drive)
{
@@ -367,15 +379,16 @@
drive->doorlocking = 0;
}
if ((drive->id->cfs_enable_2 & 0x3000) && drive->wcache)
- if (do_idedisk_flushcache(drive))
+ if (idedisk_flushcache(drive))
printk (KERN_INFO "%s: Write Cache FAILED Flushing!\n",
drive->name);
MOD_DEC_USE_COUNT;
}
-static int idedisk_media_change (ide_drive_t *drive)
+static int idedisk_check_media_change (ide_drive_t *drive)
{
- return drive->removable; /* if removable, always assume it was changed */
+ /* if removable, always assume it was changed */
+ return drive->removable;
}
/*
@@ -836,7 +849,7 @@
return 0;
}
-static int do_idedisk_standby (ide_drive_t *drive)
+static int idedisk_standby (ide_drive_t *drive)
{
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
@@ -846,20 +859,6 @@
return ide_wait_taskfile(drive, &taskfile, &hobfile, NULL);
}
-static int do_idedisk_flushcache (ide_drive_t *drive)
-{
- struct hd_drive_task_hdr taskfile;
- struct hd_drive_hob_hdr hobfile;
- memset(&taskfile, 0, sizeof(struct hd_drive_task_hdr));
- memset(&hobfile, 0, sizeof(struct hd_drive_hob_hdr));
- if (drive->id->cfs_enable_2 & 0x2400) {
- taskfile.command = WIN_FLUSH_CACHE_EXT;
- } else {
- taskfile.command = WIN_FLUSH_CACHE;
- }
- return ide_wait_taskfile(drive, &taskfile, &hobfile, NULL);
-}
-
static int set_acoustic (ide_drive_t *drive, int arg)
{
struct hd_drive_task_hdr taskfile;
@@ -1040,72 +1039,36 @@
static int idedisk_cleanup (ide_drive_t *drive)
{
-
- /* FIXME: we will have to think twice whatever this is the proper place
- * to do it.
- */
-
put_device(&drive->device);
if ((drive->id->cfs_enable_2 & 0x3000) && drive->wcache)
- if (do_idedisk_flushcache(drive))
+ if (idedisk_flushcache(drive))
printk (KERN_INFO "%s: Write Cache FAILED Flushing!\n",
drive->name);
return ide_unregister_subdriver(drive);
}
-static int idedisk_reinit(ide_drive_t *drive);
-
/*
* IDE subdriver functions, registered with ide.c
*/
static struct ata_operations idedisk_driver = {
owner: THIS_MODULE,
cleanup: idedisk_cleanup,
- standby: do_idedisk_standby,
- flushcache: do_idedisk_flushcache,
+ standby: idedisk_standby,
do_request: do_rw_disk,
end_request: NULL,
ioctl: NULL,
open: idedisk_open,
release: idedisk_release,
- media_change: idedisk_media_change,
- revalidate: ide_revalidate_drive,
+ check_media_change: idedisk_check_media_change,
+ revalidate: NULL, /* use default method */
pre_reset: idedisk_pre_reset,
capacity: idedisk_capacity,
special: idedisk_special,
- proc: idedisk_proc,
- driver_reinit: idedisk_reinit,
+ proc: idedisk_proc
};
MODULE_DESCRIPTION("ATA DISK Driver");
-static int idedisk_reinit(ide_drive_t *drive)
-{
- int failed = 0;
-
- MOD_INC_USE_COUNT;
-
- if (ide_register_subdriver (drive, &idedisk_driver)) {
- printk (KERN_ERR "ide-disk: %s: Failed to register the driver with ide.c\n", drive->name);
- return 1;
- }
-
- ata_ops(drive)->busy++;
- idedisk_setup(drive);
- if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
- printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", drive->name, drive->head);
- idedisk_cleanup(drive);
- ata_ops(drive)->busy--;
- return 1;
- }
- ata_ops(drive)->busy--;
- failed--;
-
- revalidate_drives();
- MOD_DEC_USE_COUNT;
- return 0;
-}
-
static void __exit idedisk_exit (void)
{
ide_drive_t *drive;
@@ -1136,15 +1099,12 @@
printk (KERN_ERR "ide-disk: %s: Failed to register the driver with ide.c\n", drive->name);
continue;
}
- ata_ops(drive)->busy++;
idedisk_setup(drive);
if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", drive->name, drive->head);
idedisk_cleanup(drive);
- ata_ops(drive)->busy--;
continue;
}
- ata_ops(drive)->busy--;
failed--;
}
revalidate_drives();
diff -ur linux-2.5.5/drivers/ide/ide-floppy.c linux/drivers/ide/ide-floppy.c
--- linux-2.5.5/drivers/ide/ide-floppy.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/ide-floppy.c Mon Mar 4 02:50:08 2002
@@ -1819,10 +1819,10 @@
/*
* Check media change. Use a simple algorithm for now.
*/
-static int idefloppy_media_change (ide_drive_t *drive)
+static int idefloppy_check_media_change (ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
-
+
return test_and_clear_bit (IDEFLOPPY_MEDIA_CHANGED, &floppy->flags);
}
@@ -2038,8 +2038,6 @@
#endif /* CONFIG_PROC_FS */
-static int idefloppy_reinit(ide_drive_t *drive);
-
/*
* IDE subdriver functions, registered with ide.c
*/
@@ -2047,58 +2045,19 @@
owner: THIS_MODULE,
cleanup: idefloppy_cleanup,
standby: NULL,
- flushcache: NULL,
do_request: idefloppy_do_request,
end_request: idefloppy_end_request,
ioctl: idefloppy_ioctl,
open: idefloppy_open,
release: idefloppy_release,
- media_change: idefloppy_media_change,
- revalidate: ide_revalidate_drive,
+ check_media_change: idefloppy_check_media_change,
+ revalidate: NULL, /* use default method */
pre_reset: NULL,
capacity: idefloppy_capacity,
special: NULL,
- proc: idefloppy_proc,
- driver_reinit: idefloppy_reinit,
+ proc: idefloppy_proc
};
-static int idefloppy_reinit (ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy;
- int failed = 0;
-
- MOD_INC_USE_COUNT;
- while ((drive = ide_scan_devices(ATA_FLOPPY, "ide-floppy", NULL, failed++)) != NULL) {
- if (!idefloppy_identify_device (drive, drive->id)) {
- printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name);
- continue;
- }
- if (drive->scsi) {
- printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name);
- continue;
- }
- if ((floppy = (idefloppy_floppy_t *) kmalloc (sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) {
- printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name);
- continue;
- }
- if (ide_register_subdriver (drive, &idefloppy_driver)) {
- printk (KERN_ERR "ide-floppy: %s: Failed to register the driver with ide.c\n", drive->name);
- kfree (floppy);
- continue;
- }
-
- /* ATA-PATTERN */
- ata_ops(drive)->busy++;
- idefloppy_setup (drive, floppy);
- ata_ops(drive)->busy--;
-
- failed--;
- }
- revalidate_drives();
- MOD_DEC_USE_COUNT;
- return 0;
-}
-
MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
static void __exit idefloppy_exit (void)
diff -ur linux-2.5.5/drivers/ide/ide-geometry.c linux/drivers/ide/ide-geometry.c
--- linux-2.5.5/drivers/ide/ide-geometry.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/ide-geometry.c Mon Mar 4 02:50:08 2002
@@ -14,14 +14,14 @@
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
extern ide_drive_t * get_info_ptr(kdev_t);
-extern unsigned long current_capacity (ide_drive_t *);
/*
* If heads is nonzero: find a translation with this many heads and S=63.
* Otherwise: find out how OnTrack Disk Manager would translate the disk.
*/
static void
-ontrack(ide_drive_t *drive, int heads, unsigned int *c, int *h, int *s) {
+ontrack(ide_drive_t *drive, int heads, unsigned int *c, int *h, int *s)
+{
static const byte dm_head_vals[] = {4, 8, 16, 32, 64, 128, 255, 0};
const byte *headp = dm_head_vals;
unsigned long total;
@@ -34,7 +34,7 @@
* computes a geometry different from what OnTrack uses.]
*/
- total = ata_ops(drive)->capacity(drive);
+ total = ata_capacity(drive);
*s = 63;
@@ -136,7 +136,7 @@
ret = 1;
}
- drive->part[0].nr_sects = current_capacity(drive);
+ drive->part[0].nr_sects = ata_capacity(drive);
if (ret)
printk("%s%s [%d/%d/%d]", msg, msg1,
diff -ur linux-2.5.5/drivers/ide/ide-pci.c linux/drivers/ide/ide-pci.c
--- linux-2.5.5/drivers/ide/ide-pci.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/ide-pci.c Mon Mar 4 11:54:25 2002
@@ -303,7 +303,9 @@
#ifdef CONFIG_BLK_DEV_IT8172
{PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G, pci_init_it8172, NULL, ide_init_it8172, NULL, {{0x00,0x00,0x00}, {0x40,0x00,0x01}}, ON_BOARD, 0, 0 },
#endif
- /* Those are id's of chips we don't deal currently with. */
+ /* Those are id's of chips we don't deal currently with,
+ * but which still need some generic quirk handling.
+ */
{PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_640, NULL, NULL, IDE_IGNORE, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410, NULL, NULL, NULL, NULL, {{0x43,0x08,0x08}, {0x47,0x08,0x08}}, ON_BOARD, 0, 0 },
@@ -313,6 +315,7 @@
{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_NOADMA },
+ {PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366, NULL, NULL, IDE_NO_DRIVER, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 240, ATA_F_IRQ | ATA_F_HPTHACK },
{0, 0, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 }};
/*
diff -ur linux-2.5.5/drivers/ide/ide-probe.c linux/drivers/ide/ide-probe.c
--- linux-2.5.5/drivers/ide/ide-probe.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/ide-probe.c Mon Mar 4 11:59:04 2002
@@ -471,9 +471,11 @@
sprintf(hwif->device.bus_id, "%04x", hwif->io_ports[IDE_DATA_OFFSET]);
sprintf(hwif->device.name, "ide");
hwif->device.driver_data = hwif;
+#ifdef CONFIG_BLK_DEV_IDEPCI
if (hwif->pci_dev)
hwif->device.parent = &hwif->pci_dev->dev;
else
+#endif
hwif->device.parent = NULL; /* Would like to do = &device_legacy */
device_register(&hwif->device);
diff -ur linux-2.5.5/drivers/ide/ide-proc.c linux/drivers/ide/ide-proc.c
--- linux-2.5.5/drivers/ide/ide-proc.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/ide-proc.c Mon Mar 4 02:50:08 2002
@@ -353,7 +353,7 @@
if (!driver)
len = sprintf(page, "(none)\n");
else
- len = sprintf(page,"%llu\n", (unsigned long long) drive->driver->capacity(drive));
+ len = sprintf(page,"%llu\n", (unsigned long long) ata_capacity(drive));
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
}
diff -ur linux-2.5.5/drivers/ide/ide-tape.c linux/drivers/ide/ide-tape.c
--- linux-2.5.5/drivers/ide/ide-tape.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/ide-tape.c Mon Mar 4 02:50:08 2002
@@ -6140,7 +6140,12 @@
#endif
-static int idetape_reinit(ide_drive_t *drive);
+static void idetape_revalidate(ide_drive_t *_dummy)
+{
+ /* We don't have to handle any partition information here, which is the
+ * default behaviour of this method.
+ */
+}
/*
* IDE subdriver functions, registered with ide.c
@@ -6149,18 +6154,16 @@
owner: THIS_MODULE,
cleanup: idetape_cleanup,
standby: NULL,
- flushcache: NULL,
do_request: idetape_do_request,
end_request: idetape_end_request,
ioctl: idetape_blkdev_ioctl,
open: idetape_blkdev_open,
release: idetape_blkdev_release,
- media_change: NULL,
- revalidate: NULL,
+ check_media_change: NULL,
+ revalidate: idetape_revalidate,
pre_reset: idetape_pre_reset,
capacity: NULL,
- proc: idetape_proc,
- driver_reinit: idetape_reinit,
+ proc: idetape_proc
};
/*
@@ -6175,12 +6178,6 @@
release: idetape_chrdev_release,
};
-/* This will propably just go entierly away... */
-static int idetape_reinit (ide_drive_t *drive)
-{
- return 1;
-}
-
MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
MODULE_LICENSE("GPL");
diff -ur linux-2.5.5/drivers/ide/ide-taskfile.c linux/drivers/ide/ide-taskfile.c
--- linux-2.5.5/drivers/ide/ide-taskfile.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/ide-taskfile.c Mon Mar 4 13:32:18 2002
@@ -1750,6 +1750,29 @@
return err;
}
+/*
+ * Issue ATA command and wait for completion. use for implementing commands in
+ * kernel.
+ *
+ * The caller has to make sure buf is never NULL!
+ */
+static int ide_wait_cmd(ide_drive_t *drive, int cmd, int nsect, int feature, int sectors, byte *argbuf)
+{
+ struct request rq;
+
+ /* FIXME: Do we really have to zero out the buffer?
+ */
+ memset(argbuf, 0, 4 + SECTOR_WORDS * 4 * sectors);
+ ide_init_drive_cmd(&rq);
+ rq.buffer = argbuf;
+ *argbuf++ = cmd;
+ *argbuf++ = nsect;
+ *argbuf++ = feature;
+ *argbuf++ = sectors;
+
+ return ide_do_drive_cmd(drive, &rq, ide_wait);
+}
+
int ide_cmd_ioctl (ide_drive_t *drive, struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
int err = 0;
@@ -1806,12 +1829,20 @@
int ide_task_ioctl (ide_drive_t *drive, struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
int err = 0;
- byte args[7], *argbuf = args;
+ u8 args[7];
+ u8 *argbuf;
int argsize = 7;
+ struct request rq;
+
+ argbuf = args;
if (copy_from_user(args, (void *)arg, 7))
return -EFAULT;
- err = ide_wait_cmd_task(drive, argbuf);
+
+ ide_init_drive_cmd(&rq);
+ rq.flags = REQ_DRIVE_TASK;
+ rq.buffer = argbuf;
+ err = ide_do_drive_cmd(drive, &rq, ide_wait);
if (copy_to_user((void *)arg, argbuf, argsize))
err = -EFAULT;
return err;
diff -ur linux-2.5.5/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.5/drivers/ide/ide.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/ide.c Mon Mar 4 16:15:55 2002
@@ -581,15 +581,76 @@
spin_unlock_irqrestore(&ide_lock, flags);
}
+static void ata_pre_reset (ide_drive_t *drive)
+{
+ if (ata_ops(drive) && ata_ops(drive)->pre_reset)
+ ata_ops(drive)->pre_reset(drive);
+
+ if (!drive->keep_settings && !drive->using_dma) {
+ drive->unmask = 0;
+ drive->io_32bit = 0;
+ }
+
+ if (drive->using_dma) {
+ /* check the DMA crc count */
+ if (drive->crc_count) {
+ HWIF(drive)->dmaproc(ide_dma_off_quietly, drive);
+ if ((HWIF(drive)->speedproc) != NULL)
+ HWIF(drive)->speedproc(drive, ide_auto_reduce_xfer(drive));
+ if (drive->current_speed >= XFER_SW_DMA_0)
+ HWIF(drive)->dmaproc(ide_dma_on, drive);
+ } else
+ HWIF(drive)->dmaproc(ide_dma_off, drive);
+ }
+}
+
/*
* The capacity of a drive according to its current geometry/LBA settings in
* sectors.
*/
-unsigned long current_capacity (ide_drive_t *drive)
+unsigned long ata_capacity(ide_drive_t *drive)
{
if (!drive->present || !drive->driver)
return 0;
- return ata_ops(drive)->capacity(drive);
+
+ if (ata_ops(drive) && ata_ops(drive)->capacity)
+ return ata_ops(drive)->capacity(drive);
+
+ /* FIXME: This magic number seems to be bogous. */
+ return 0x7fffffff;
+}
+
+/*
+ * This is used to issue WIN_SPECIFY, WIN_RESTORE, and WIN_SETMULT commands to
+ * a drive. It used to do much more, but has been scaled back.
+ */
+static ide_startstop_t ata_special (ide_drive_t *drive)
+{
+ special_t *s = &drive->special;
+
+#ifdef DEBUG
+ printk("%s: ata_special: 0x%02x\n", drive->name, s->all);
+#endif
+ if (s->b.set_tune) {
+ ide_tuneproc_t *tuneproc = HWIF(drive)->tuneproc;
+ s->b.set_tune = 0;
+ if (tuneproc != NULL)
+ tuneproc(drive, drive->tune_req);
+ } else if (drive->driver != NULL) {
+ if (ata_ops(drive)->special)
+ return ata_ops(drive)->special(drive);
+ else {
+ drive->special.all = 0;
+ drive->mult_req = 0;
+
+ return ide_stopped;
+ }
+ } else if (s->all) {
+ printk("%s: bad special flag: 0x%02x\n", drive->name, s->all);
+ s->all = 0;
+ }
+
+ return ide_stopped;
}
extern struct block_device_operations ide_fops[];
@@ -612,9 +673,8 @@
register_disk(gd,mk_kdev(hwif->major,unit<<PARTN_BITS),
#ifdef CONFIG_BLK_DEV_ISAPNP
(drive->forced_geom && drive->noprobe) ? 1 :
-#endif /* CONFIG_BLK_DEV_ISAPNP */
- 1<<PARTN_BITS, ide_fops,
- current_capacity(drive));
+#endif
+ 1 << PARTN_BITS, ide_fops, ata_capacity(drive));
}
}
@@ -702,37 +762,6 @@
return ide_stopped;
}
-static void check_dma_crc (ide_drive_t *drive)
-{
- if (drive->crc_count) {
- (void) HWIF(drive)->dmaproc(ide_dma_off_quietly, drive);
- if ((HWIF(drive)->speedproc) != NULL)
- HWIF(drive)->speedproc(drive, ide_auto_reduce_xfer(drive));
- if (drive->current_speed >= XFER_SW_DMA_0)
- (void) HWIF(drive)->dmaproc(ide_dma_on, drive);
- } else {
- (void) HWIF(drive)->dmaproc(ide_dma_off, drive);
- }
-}
-
-static void pre_reset (ide_drive_t *drive)
-{
- if (drive->driver != NULL)
- ata_ops(drive)->pre_reset(drive);
-
- if (!drive->keep_settings) {
- if (drive->using_dma) {
- check_dma_crc(drive);
- } else {
- drive->unmask = 0;
- drive->io_32bit = 0;
- }
- return;
- }
- if (drive->using_dma)
- check_dma_crc(drive);
-}
-
/*
* do_reset1() attempts to recover a confused drive by resetting it.
* Unfortunately, resetting a disk drive actually resets all devices on
@@ -760,7 +789,7 @@
/* For an ATAPI device, first try an ATAPI SRST. */
if (drive->type != ATA_DISK && !do_not_try_atapi) {
- pre_reset(drive);
+ ata_pre_reset(drive);
SELECT_DRIVE(hwif,drive);
udelay (20);
OUT_BYTE (WIN_SRST, IDE_COMMAND_REG);
@@ -775,7 +804,7 @@
* for any of the drives on this interface.
*/
for (unit = 0; unit < MAX_DRIVES; ++unit)
- pre_reset(&hwif->drives[unit]);
+ ata_pre_reset(&hwif->drives[unit]);
#if OK_TO_RESET_CONTROLLER
if (!IDE_CONTROL_REG) {
@@ -1044,7 +1073,7 @@
if (rq->errors >= ERROR_MAX) {
/* ATA-PATTERN */
- if (drive->driver != NULL)
+ if (ata_ops(drive) && ata_ops(drive)->end_request)
ata_ops(drive)->end_request(drive, 0);
else
ide_end_request(drive, 0);
@@ -1101,31 +1130,6 @@
}
/*
- * do_special() is used to issue WIN_SPECIFY, WIN_RESTORE, and WIN_SETMULT
- * commands to a drive. It used to do much more, but has been scaled back.
- */
-static ide_startstop_t do_special (ide_drive_t *drive)
-{
- special_t *s = &drive->special;
-
-#ifdef DEBUG
- printk("%s: do_special: 0x%02x\n", drive->name, s->all);
-#endif
- if (s->b.set_tune) {
- ide_tuneproc_t *tuneproc = HWIF(drive)->tuneproc;
- s->b.set_tune = 0;
- if (tuneproc != NULL)
- tuneproc(drive, drive->tune_req);
- } else if (drive->driver != NULL) {
- return ata_ops(drive)->special(drive);
- } else if (s->all) {
- printk("%s: bad special flag: 0x%02x\n", drive->name, s->all);
- s->all = 0;
- }
- return ide_stopped;
-}
-
-/*
* This routine busy-waits for the drive status to be not "busy".
* It then checks the status for all of the "good" bits and none
* of the "bad" bits, and if all is okay it returns 0. All other
@@ -1338,16 +1342,21 @@
if (rq->flags & (REQ_DRIVE_CMD | REQ_DRIVE_TASK | REQ_DRIVE_TASKFILE))
return execute_drive_cmd(drive, rq);
- if (drive->driver != NULL) {
- return ata_ops(drive)->do_request(drive, rq, block);
+ if (ata_ops(drive)) {
+ if (ata_ops(drive)->do_request)
+ return ata_ops(drive)->do_request(drive, rq, block);
+ else {
+ ide_end_request(drive, 0);
+ return ide_stopped;
+ }
}
printk(KERN_WARNING "%s: device type %d not supported\n",
drive->name, drive->type);
goto kill_rq;
}
- return do_special(drive);
+ return ata_special(drive);
kill_rq:
- if (drive->driver != NULL)
+ if (ata_ops(drive) && ata_ops(drive)->end_request)
ata_ops(drive)->end_request(drive, 0);
else
ide_end_request(drive, 0);
@@ -1569,13 +1578,13 @@
/*
* end current dma transaction
*/
- (void) hwif->dmaproc(ide_dma_end, drive);
+ hwif->dmaproc(ide_dma_end, drive);
/*
* complain a little, later we might remove some of this verbosity
*/
printk("%s: timeout waiting for DMA\n", drive->name);
- (void) hwif->dmaproc(ide_dma_timeout, drive);
+ hwif->dmaproc(ide_dma_timeout, drive);
/*
* disable dma for now, but remember that we did so because of
@@ -1584,7 +1593,7 @@
*/
drive->retry_pio++;
drive->state = DMA_PIO_RETRY;
- (void) hwif->dmaproc(ide_dma_off_quietly, drive);
+ hwif->dmaproc(ide_dma_off_quietly, drive);
/*
* un-busy drive etc (hwgroup->busy is cleared on return) and
@@ -1611,7 +1620,7 @@
ide_hwgroup_t *hwgroup = (ide_hwgroup_t *) data;
ide_handler_t *handler;
ide_expiry_t *expiry;
- unsigned long flags;
+ unsigned long flags;
unsigned long wait;
/*
@@ -1937,16 +1946,6 @@
}
-/* Common for ide-floppy.c and ide-disk.c */
-void ide_revalidate_drive (ide_drive_t *drive)
-{
- struct gendisk *g = HWIF(drive)->gd;
- int minor = (drive->select.b.unit << g->minor_shift);
- kdev_t dev = mk_kdev(g->major, minor);
-
- grok_partitions(dev, current_capacity(drive));
-}
-
/*
* This routine is called to flush all partitions and partition tables
* for a changed disk, and then re-read the new partition table.
@@ -1975,13 +1974,16 @@
spin_unlock_irqrestore(&ide_lock, flags);
res = wipe_partitions(i_rdev);
- if (res)
- goto leave;
-
- if (ata_ops(drive)->revalidate)
- ata_ops(drive)->revalidate(drive);
+ if (!res) {
+ if (ata_ops(drive) && ata_ops(drive)->revalidate) {
+ ata_get(ata_ops(drive));
+ /* this is a no-op for tapes and SCSI based access */
+ ata_ops(drive)->revalidate(drive);
+ ata_put(ata_ops(drive));
+ } else
+ grok_partitions(i_rdev, ata_capacity(drive));
+ }
- leave:
drive->busy = 0;
wake_up(&drive->wqueue);
MOD_DEC_USE_COUNT;
@@ -2073,9 +2075,14 @@
#endif /* CONFIG_KMOD */
while (drive->busy)
sleep_on(&drive->wqueue);
- drive->usage++;
- if (drive->driver != NULL)
+ ++drive->usage;
+ if (ata_ops(drive) && ata_ops(drive)->open)
return ata_ops(drive)->open(inode, filp, drive);
+ else {
+ --drive->usage;
+ return -ENODEV;
+ }
+
printk ("%s: driver not present\n", drive->name);
drive->usage--;
return -ENXIO;
@@ -2085,15 +2092,16 @@
* Releasing a block device means we sync() it, so that it can safely
* be forgotten about...
*/
-static int ide_release (struct inode * inode, struct file * file)
+static int ide_release(struct inode * inode, struct file * file)
{
ide_drive_t *drive;
- if ((drive = get_info_ptr(inode->i_rdev)) != NULL) {
- drive->usage--;
- if (drive->driver != NULL)
- ata_ops(drive)->release(inode, file, drive);
- }
+ if (!(drive = get_info_ptr(inode->i_rdev)))
+ return 0;
+
+ drive->usage--;
+ if (ata_ops(drive) && ata_ops(drive)->release)
+ ata_ops(drive)->release(inode, file, drive);
return 0;
}
@@ -2164,11 +2172,17 @@
continue;
if (drive->busy || drive->usage)
goto abort;
- if (drive->driver != NULL && ata_ops(drive)->cleanup(drive))
- goto abort;
+ if (ata_ops(drive)) {
+ if (ata_ops(drive)->cleanup) {
+ if (ata_ops(drive)->cleanup(drive))
+ goto abort;
+ } else {
+ ide_unregister_subdriver(drive);
+ }
+ }
}
hwif->present = 0;
-
+
/*
* All clear? Then blow away the buffer cache
*/
@@ -2595,33 +2609,6 @@
ide_add_setting(drive, "number", SETTING_RW, -1, -1, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL);
}
-int ide_wait_cmd (ide_drive_t *drive, int cmd, int nsect, int feature, int sectors, byte *buf)
-{
- struct request rq;
- byte buffer[4];
-
- if (!buf)
- buf = buffer;
- memset(buf, 0, 4 + SECTOR_WORDS * 4 * sectors);
- ide_init_drive_cmd(&rq);
- rq.buffer = buf;
- *buf++ = cmd;
- *buf++ = nsect;
- *buf++ = feature;
- *buf++ = sectors;
- return ide_do_drive_cmd(drive, &rq, ide_wait);
-}
-
-int ide_wait_cmd_task (ide_drive_t *drive, byte *buf)
-{
- struct request rq;
-
- ide_init_drive_cmd(&rq);
- rq.flags = REQ_DRIVE_TASK;
- rq.buffer = buf;
- return ide_do_drive_cmd(drive, &rq, ide_wait);
-}
-
/*
* Delay for *at least* 50ms. As we don't know how much time is left
* until the next tick occurs, we wait an extra tick to be safe.
@@ -2721,7 +2708,8 @@
}
case BLKRRPART: /* Re-read partition tables */
- if (!capable(CAP_SYS_ADMIN)) return -EACCES;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
return ide_revalidate_disk(inode->i_rdev);
case HDIO_OBSOLETE_IDENTITY:
@@ -2866,9 +2854,9 @@
return 0;
default:
- if (drive->driver != NULL)
+ if (ata_ops(drive) && ata_ops(drive)->ioctl)
return ata_ops(drive)->ioctl(drive, inode, file, cmd, arg);
- return -EPERM;
+ return -EINVAL;
}
}
@@ -2878,8 +2866,14 @@
if ((drive = get_info_ptr(i_rdev)) == NULL)
return -ENODEV;
- if (drive->driver != NULL)
- return ata_ops(drive)->media_change(drive);
+ if (ata_ops(drive)) {
+ ata_get(ata_ops(drive));
+ if (ata_ops(drive)->check_media_change)
+ return ata_ops(drive)->check_media_change(drive);
+ else
+ return 1; /* assume it was changed */
+ ata_put(ata_ops(drive));
+ }
return 0;
}
@@ -3470,24 +3464,24 @@
*/
probe_for_hwifs ();
-#ifdef CONFIG_BLK_DEV_IDE
-#if defined(__mc68000__) || defined(CONFIG_APUS)
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULES)
+# if defined(__mc68000__) || defined(CONFIG_APUS)
if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET]) {
ide_get_lock(&ide_intr_lock, NULL, NULL);/* for atari only */
disable_irq(ide_hwifs[0].irq); /* disable_irq_nosync ?? */
// disable_irq_nosync(ide_hwifs[0].irq);
}
-#endif /* __mc68000__ || CONFIG_APUS */
+# endif
ideprobe_init();
-#if defined(__mc68000__) || defined(CONFIG_APUS)
+# if defined(__mc68000__) || defined(CONFIG_APUS)
if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET]) {
enable_irq(ide_hwifs[0].irq);
ide_release_lock(&ide_intr_lock);/* for atari only */
}
-#endif /* __mc68000__ || CONFIG_APUS */
-#endif /* CONFIG_BLK_DEV_IDE */
+# endif
+#endif
#ifdef CONFIG_PROC_FS
proc_ide_create();
@@ -3517,79 +3511,12 @@
#endif
}
-static int default_cleanup (ide_drive_t *drive)
-{
- return ide_unregister_subdriver(drive);
-}
-
-static int default_standby (ide_drive_t *drive)
-{
- return 0;
-}
-
-static int default_flushcache (ide_drive_t *drive)
-{
- return 0;
-}
-
-static ide_startstop_t default_do_request(ide_drive_t *drive, struct request *rq, unsigned long block)
-{
- ide_end_request(drive, 0);
- return ide_stopped;
-}
-
/* This is the default end request function as well */
int ide_end_request(ide_drive_t *drive, int uptodate)
{
return __ide_end_request(drive, uptodate, 0);
}
-static int default_ioctl (ide_drive_t *drive, struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- return -EIO;
-}
-
-static int default_open (struct inode *inode, struct file *filp, ide_drive_t *drive)
-{
- drive->usage--;
- return -EIO;
-}
-
-static void default_release (struct inode *inode, struct file *filp, ide_drive_t *drive)
-{
-}
-
-static int default_check_media_change (ide_drive_t *drive)
-{
- return 1;
-}
-
-static void default_pre_reset (ide_drive_t *drive)
-{
-}
-
-static unsigned long default_capacity (ide_drive_t *drive)
-{
- return 0x7fffffff;
-}
-
-static ide_startstop_t default_special (ide_drive_t *drive)
-{
- special_t *s = &drive->special;
-
- s->all = 0;
- drive->mult_req = 0;
- return ide_stopped;
-}
-
-static int default_driver_reinit (ide_drive_t *drive)
-{
- printk(KERN_ERR "%s: does not support hotswap of device class !\n", drive->name);
-
- return 0;
-}
-
/*
* Lookup IDE devices, which requested a particular deriver
*/
@@ -3627,37 +3554,11 @@
return 1;
}
- drive->driver = driver;
-
- /* Fill in the default handlers
+ /* FIXME: This will be pushed to the drivers! Thus allowing us to
+ * save one parameter here eparate this out.
*/
- if (driver->cleanup == NULL)
- driver->cleanup = default_cleanup;
- if (driver->standby == NULL)
- driver->standby = default_standby;
- if (driver->flushcache == NULL)
- driver->flushcache = default_flushcache;
- if (driver->do_request == NULL)
- driver->do_request = default_do_request;
- if (driver->end_request == NULL)
- driver->end_request = ide_end_request;
- if (driver->ioctl == NULL)
- driver->ioctl = default_ioctl;
- if (driver->open == NULL)
- driver->open = default_open;
- if (driver->release == NULL)
- driver->release = default_release;
- if (driver->media_change == NULL)
- driver->media_change = default_check_media_change;
- if (driver->pre_reset == NULL)
- driver->pre_reset = default_pre_reset;
- if (driver->capacity == NULL)
- driver->capacity = default_capacity;
- if (driver->special == NULL)
- driver->special = default_special;
- if (driver->driver_reinit == NULL)
- driver->driver_reinit = default_driver_reinit;
+ drive->driver = driver;
restore_flags(flags); /* all CPUs */
/* FIXME: Check what this magic number is supposed to be about? */
@@ -3684,26 +3585,33 @@
drive->suspend_reset = 0;
#ifdef CONFIG_PROC_FS
ide_add_proc_entries(drive->proc, generic_subdriver_entries, drive);
- ide_add_proc_entries(drive->proc, driver->proc, drive);
+ if (ata_ops(drive))
+ ide_add_proc_entries(drive->proc, ata_ops(drive)->proc, drive);
#endif
return 0;
}
+/*
+ * This is in fact the default cleanup routine.
+ *
+ * FIXME: Check whatever we maybe don't call it twice!.
+ */
int ide_unregister_subdriver(ide_drive_t *drive)
{
unsigned long flags;
save_flags(flags); /* all CPUs */
cli(); /* all CPUs */
- if (drive->usage || drive->busy || drive->driver == NULL || ata_ops(drive)->busy) {
+ if (drive->usage || drive->busy || !ata_ops(drive) || ata_ops(drive)->busy) {
restore_flags(flags); /* all CPUs */
return 1;
}
#if defined(CONFIG_BLK_DEV_ISAPNP) && defined(CONFIG_ISAPNP) && defined(MODULE)
pnpide_init(0);
-#endif /* CONFIG_BLK_DEV_ISAPNP */
+#endif
#ifdef CONFIG_PROC_FS
- ide_remove_proc_entries(drive->proc, ata_ops(drive)->proc);
+ if (ata_ops(drive))
+ ide_remove_proc_entries(drive->proc, ata_ops(drive)->proc);
ide_remove_proc_entries(drive->proc, generic_subdriver_entries);
#endif
auto_remove_settings(drive);
@@ -3778,11 +3686,8 @@
EXPORT_SYMBOL(ide_end_drive_cmd);
EXPORT_SYMBOL(__ide_end_request);
EXPORT_SYMBOL(ide_end_request);
-EXPORT_SYMBOL(ide_revalidate_drive);
EXPORT_SYMBOL(ide_revalidate_disk);
EXPORT_SYMBOL(ide_cmd);
-EXPORT_SYMBOL(ide_wait_cmd);
-EXPORT_SYMBOL(ide_wait_cmd_task);
EXPORT_SYMBOL(ide_delay_50ms);
EXPORT_SYMBOL(ide_stall_queue);
#ifdef CONFIG_PROC_FS
@@ -3798,7 +3703,6 @@
EXPORT_SYMBOL(ide_unregister);
EXPORT_SYMBOL(ide_setup_ports);
EXPORT_SYMBOL(get_info_ptr);
-EXPORT_SYMBOL(current_capacity);
static int ide_notify_reboot (struct notifier_block *this, unsigned long event, void *x)
{
@@ -3828,12 +3732,14 @@
/* set the drive to standby */
printk("%s ", drive->name);
- if (event != SYS_RESTART)
- if (drive->driver != NULL && ata_ops(drive)->standby(drive))
- continue;
+ if (ata_ops(drive)) {
+ if (event != SYS_RESTART)
+ if (ata_ops(drive)->standby && ata_ops(drive)->standby(drive))
+ continue;
- if (drive->driver != NULL && ata_ops(drive)->cleanup(drive))
- continue;
+ if (ata_ops(drive)->cleanup)
+ ata_ops(drive)->cleanup(drive);
+ }
}
}
printk("\n");
@@ -3928,7 +3834,7 @@
ide_unregister(index);
# if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
if (ide_hwifs[index].dma_base)
- (void) ide_release_dma(&ide_hwifs[index]);
+ ide_release_dma(&ide_hwifs[index]);
# endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
}
diff -ur linux-2.5.5/drivers/ide/piix.c linux/drivers/ide/piix.c
--- linux-2.5.5/drivers/ide/piix.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/piix.c Mon Mar 4 02:50:08 2002
@@ -214,7 +214,7 @@
{
unsigned long flags;
u16 master_data;
- byte slave_data;
+ u8 slave_data;
int is_slave = (&HWIF(drive)->drives[1] == drive);
int master_port = HWIF(drive)->index ? 0x42 : 0x40;
int slave_port = 0x44;
diff -ur linux-2.5.5/drivers/ide/serverworks.c linux/drivers/ide/serverworks.c
--- linux-2.5.5/drivers/ide/serverworks.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/ide/serverworks.c Mon Mar 4 02:50:08 2002
@@ -660,8 +660,10 @@
hwif->autodma = 0;
#else /* CONFIG_BLK_DEV_IDEDMA */
if (hwif->dma_base) {
+#ifdef CONFIG_IDEDMA_AUTO
if (!noautodma)
hwif->autodma = 1;
+#endif
hwif->dmaproc = &svwks_dmaproc;
hwif->highmem = 1;
} else {
diff -ur linux-2.5.5/drivers/scsi/ide-scsi.c linux/drivers/scsi/ide-scsi.c
--- linux-2.5.5/drivers/scsi/ide-scsi.c Mon Mar 4 21:07:15 2002
+++ linux/drivers/scsi/ide-scsi.c Mon Mar 4 02:50:08 2002
@@ -536,7 +536,11 @@
return 0;
}
-static int idescsi_reinit(ide_drive_t *drive);
+static void idescsi_revalidate(ide_drive_t *_dummy)
+{
+ /* The partition information will be handled by the SCSI layer.
+ */
+}
/*
* IDE subdriver functions, registered with ide.c
@@ -545,26 +549,19 @@
owner: THIS_MODULE,
cleanup: idescsi_cleanup,
standby: NULL,
- flushcache: NULL,
do_request: idescsi_do_request,
end_request: idescsi_end_request,
ioctl: NULL,
open: idescsi_open,
release: idescsi_ide_release,
- media_change: NULL,
- revalidate: NULL,
+ check_media_change: NULL,
+ revalidate: idescsi_revalidate,
pre_reset: NULL,
capacity: NULL,
special: NULL,
- proc: NULL,
- driver_reinit: idescsi_reinit,
+ proc: NULL
};
-static int idescsi_reinit (ide_drive_t *drive)
-{
- return 0;
-}
-
/*
* idescsi_init will register the driver for each scsi.
*/
diff -ur linux-2.5.5/include/linux/ide.h linux/include/linux/ide.h
--- linux-2.5.5/include/linux/ide.h Mon Mar 4 21:07:16 2002
+++ linux/include/linux/ide.h Mon Mar 4 20:52:43 2002
@@ -51,29 +51,17 @@
#endif
#ifdef CONFIG_BLK_DEV_CMD640
-#if 0 /* change to 1 when debugging cmd640 problems */
+# if 0 /* change to 1 when debugging cmd640 problems */
void cmd640_dump_regs (void);
-#define CMD640_DUMP_REGS cmd640_dump_regs() /* for debugging cmd640 chipset */
+# define CMD640_DUMP_REGS cmd640_dump_regs() /* for debugging cmd640 chipset */
+# endif
#endif
-#endif /* CONFIG_BLK_DEV_CMD640 */
#ifndef DISABLE_IRQ_NOSYNC
-#define DISABLE_IRQ_NOSYNC 0
+# define DISABLE_IRQ_NOSYNC 0
#endif
/*
- * IDE_DRIVE_CMD is used to implement many features of the hdparm utility
- */
-#define IDE_DRIVE_CMD 99 /* (magic) undef to reduce kernel size*/
-
-#define IDE_DRIVE_TASK 98
-
-/*
- * IDE_DRIVE_TASKFILE is used to implement many features needed for raw tasks
- */
-#define IDE_DRIVE_TASKFILE 97
-
-/*
* "No user-serviceable parts" beyond this point :)
*****************************************************************************/
@@ -95,7 +83,7 @@
* Ensure that various configuration flags have compatible settings
*/
#ifdef REALLY_SLOW_IO
-#undef REALLY_FAST_IO
+# undef REALLY_FAST_IO
#endif
#define HWIF(drive) ((drive)->hwif)
@@ -705,21 +693,19 @@
unsigned busy: 1; /* FIXME: this will go soon away... */
int (*cleanup)(ide_drive_t *);
int (*standby)(ide_drive_t *);
- int (*flushcache)(ide_drive_t *);
ide_startstop_t (*do_request)(ide_drive_t *, struct request *, unsigned long);
int (*end_request)(ide_drive_t *drive, int uptodate);
int (*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long);
int (*open)(struct inode *, struct file *, ide_drive_t *);
void (*release)(struct inode *, struct file *, ide_drive_t *);
- int (*media_change)(ide_drive_t *);
+ int (*check_media_change)(ide_drive_t *);
void (*revalidate)(ide_drive_t *);
void (*pre_reset)(ide_drive_t *);
unsigned long (*capacity)(ide_drive_t *);
ide_startstop_t (*special)(ide_drive_t *);
- ide_proc_entry_t *proc;
- int (*driver_reinit)(ide_drive_t *);
+ ide_proc_entry_t *proc;
};
/* Alas, no aliases. Too much hassle with bringing module.h everywhere */
@@ -734,6 +720,7 @@
__MOD_DEC_USE_COUNT((ata)->owner); \
} while(0)
+extern unsigned long ata_capacity(ide_drive_t *drive);
/* FIXME: Actually implement and use them as soon as possible! to make the
* ide_scan_devices() go away! */
@@ -819,16 +806,6 @@
ide_drive_t *get_info_ptr (kdev_t i_rdev);
/*
- * Return the current idea about the total capacity of this drive.
- */
-unsigned long current_capacity (ide_drive_t *drive);
-
-/*
- * Revalidate (read partition tables)
- */
-extern void ide_revalidate_drive (ide_drive_t *drive);
-
-/*
* Start a reset operation for an IDE interface.
* The caller should return immediately after invoking this.
*/
@@ -892,18 +869,9 @@
/*
* Clean up after success/failure of an explicit drive cmd.
- * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_CMD).
- * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_TASK_MASK).
*/
void ide_end_drive_cmd (ide_drive_t *drive, byte stat, byte err);
-/*
- * Issue ATA command and wait for completion. use for implementing commands in kernel
- */
-int ide_wait_cmd (ide_drive_t *drive, int cmd, int nsect, int feature, int sectors, byte *buf);
-
-int ide_wait_cmd_task (ide_drive_t *drive, byte *buf);
-
typedef struct ide_task_s {
task_ioreg_t tfRegister[8];
task_ioreg_t hobRegister[8];