![[LWN Logo]](/images/lcorner.png) |
|
![[LWN.net]](/images/Included.png) |
From: Patricia Gaughen <gone@us.ibm.com>
To: Christoph Hellwig <hch@infradead.org>
Subject: Re: [PATCH] discontigmem support for ia32 NUMA box against 2.4.19pre8
Date: Thu, 09 May 2002 18:30:01 -0700
Cc: marcelo@conectiva.com.br, linux-kernel@vger.kernel.org
Okay here's the updated version of the patch.
you can get it off of sourceforge at:
http://west.dl.sourceforge.net/sourceforge/lse/x86_discontigmem-2.4.19pre8-2
This patch depends on the the modularization of setup_arch() patch I sent out
yesterday, and also on the version of the modularization of mem_init() patch
that Christoph posted (which I copied onto sourceforge: it's
x86_meminit-2.4.19pre8-3).
Thanks,
Pat
--
Patricia Gaughen (gone@us.ibm.com)
IBM Linux Technology Center
http://www.ibm.com/linux/ltc/
--- linux-2.4.19pre8-cleanup/arch/i386/config.in Tue May 7 11:54:04 2002
+++ linux-2.4.19pre8-multi/arch/i386/config.in Thu May 9 17:26:22 2002
@@ -198,7 +198,15 @@
define_bool CONFIG_X86_IO_APIC y
fi
else
- bool 'Multiquad NUMA system' CONFIG_MULTIQUAD
+ bool 'Multiquad NUMA system' CONFIG_X86_NUMAQ
+ if [ "$CONFIG_X86_NUMAQ" = "y" ]; then
+ bool 'Numa Memory Allocation Support' CONFIG_NUMA
+ if [ "$CONFIG_NUMA" = "y" ]; then
+ define_bool CONFIG_DISCONTIGMEM y
+ define_bool CONFIG_HAVE_ARCH_BOOTMEM_NODE y
+ fi
+ define_bool CONFIG_MULTIQUAD y
+ fi
fi
if [ "$CONFIG_SMP" = "y" -a "$CONFIG_X86_CMPXCHG" = "y" ]; then
--- linux-2.4.19pre8-cleanup/arch/i386/kernel/Makefile Fri Nov 9 14:21:21 2001
+++ linux-2.4.19pre8-multi/arch/i386/kernel/Makefile Thu May 9 17:21:36 2002
@@ -40,5 +40,6 @@
obj-$(CONFIG_X86_LOCAL_APIC) += mpparse.o apic.o nmi.o
obj-$(CONFIG_X86_IO_APIC) += io_apic.o acpitable.o
obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o
+obj-$(CONFIG_X86_NUMAQ) += numaq.o
include $(TOPDIR)/Rules.make
--- linux-2.4.19pre8-cleanup/arch/i386/kernel/setup.c Thu May 9 17:27:18 2002
+++ linux-2.4.19pre8-multi/arch/i386/kernel/setup.c Thu May 9 17:21:36 2002
@@ -115,6 +115,7 @@
#include <asm/dma.h>
#include <asm/mpspec.h>
#include <asm/mmu_context.h>
+#include <asm/setup.h>
/*
* Machine setup..
*/
@@ -800,20 +801,10 @@
}
}
-#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
-
-/*
- * Reserved space for vmalloc and iomap - defined in asm/page.h
- */
-#define MAXMEM_PFN PFN_DOWN(MAXMEM)
-#define MAX_NONPAE_PFN (1 << 20)
-
/*
* Find the highest page frame number we have available
*/
-static unsigned long __init find_max_pfn(void)
+unsigned long __init find_max_pfn(void)
{
unsigned long max_pfn;
int i;
@@ -838,7 +829,7 @@
/*
* Determine low and high memory ranges:
*/
-static unsigned long __init find_max_low_pfn(unsigned long *max_pfn)
+unsigned long __init find_max_low_pfn(unsigned long *max_pfn)
{
unsigned long max_low_pfn;
@@ -894,6 +885,7 @@
return max_low_pfn;
}
+#ifndef CONFIG_DISCONTIGMEM
/*
* Register fully available low RAM pages with the bootmem allocator.
*/
@@ -1015,6 +1007,7 @@
return max_low_pfn;
}
+#endif /* !CONFIG_DISCONTIGMEM */
/*
* Request address space for all standard RAM and ROM resources
--- linux-2.4.19pre8-cleanup/arch/i386/kernel/numaq.c Wed Dec 31 16:00:00 1969
+++ linux-2.4.19pre8-multi/arch/i386/kernel/numaq.c Thu May 9 17:21:37 2002
@@ -0,0 +1,141 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <asm/numaq.h>
+
+unsigned long long nodes_mem_start[MAX_NUMNODES];
+unsigned long long nodes_mem_size[MAX_NUMNODES];
+
+/*
+ * Function: smp_dump_qct()
+ *
+ * Description: gets memory layout from the quad config table. This
+ * function also increments numnodes with the number of nodes (quads)
+ * present.
+ */
+static void __init smp_dump_qct(void)
+{
+ int node;
+ struct eachquadmem *eq;
+ struct sys_cfg_data *scd =
+ (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR);
+
+#define MB_TO_B(addr) ((addr) << 20)
+ numnodes = 0;
+ for(node = 0; node < MAX_NUMNODES; node++) {
+ if(scd->quads_present31_0 & (1 << node)) {
+ numnodes++;
+ eq = &scd->eq[node];
+ /* Convert to bytes */
+ nodes_mem_start[node] = MB_TO_B(eq->hi_shrd_mem_start - eq->priv_mem_size);
+ nodes_mem_size[node] = MB_TO_B(eq->hi_shrd_mem_size + eq->priv_mem_size);
+ }
+ }
+}
+
+/*
+ * -----------------------------------------
+ *
+ * functions related to physnode_map
+ *
+ * -----------------------------------------
+ */
+/*
+ * physnode_map keeps track of the physical memory layout of the
+ * numaq nodes on a 256Mb break (each element of the array will
+ * represent 256Mb of memory and will be marked by the node id. so,
+ * if the first gig is on node 0, and the second gig is on node 1
+ * physnode_map will contain:
+ * physnode_map[0-3] = 0;
+ * physnode_map[4-7] = 1;
+ * physnode_map[8- ] = -1;
+ */
+int physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1};
+
+#define MB_TO_ELEMENT(x) (x >> ELEMENT_REPRESENTS)
+#define PA_TO_MB(pa) (pa >> 20) /* assumption: a physical address is in
bytes */
+
+int numaqpa_to_nid(unsigned long long pa)
+{
+ int nid;
+
+ nid = physnode_map[MB_TO_ELEMENT(PA_TO_MB(pa))];
+
+ /* the physical address passed in is not in the map for the system */
+ if (nid == -1)
+ BUG();
+
+ return nid;
+}
+
+int numaqpfn_to_nid(unsigned long pfn)
+{
+ return numaqpa_to_nid(pfn << PAGE_SHIFT);
+}
+
+/*
+ * for each node mark the regions
+ * TOPOFMEM = hi_shrd_mem_start + hi_shrd_mem_size
+ *
+ * need to be very careful to not mark 1024+ as belonging
+ * to node 0. will want 1027 to show as belonging to node 1
+ * example:
+ * TOPOFMEM = 1024
+ * 1024 >> 8 = 4 (subtract 1 for starting at 0]
+ * tmpvar = TOPOFMEM - 256 = 768
+ * 1024 >> 8 = 4 (subtract 1 for starting at 0]
+ *
+ */
+static void __init initialize_physnode_map(void)
+{
+ int nid;
+ unsigned int topofmem, cur;
+ struct eachquadmem *eq;
+ struct sys_cfg_data *scd =
+ (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR);
+
+
+ for(nid = 0; nid < numnodes; nid++) {
+ if(scd->quads_present31_0 & (1 << nid)) {
+ eq = &scd->eq[nid];
+ cur = eq->hi_shrd_mem_start;
+ topofmem = eq->hi_shrd_mem_start + eq->hi_shrd_mem_size;
+ while (cur < topofmem) {
+ physnode_map[cur >> 8] = nid;
+ cur += (ELEMENT_REPRESENTS - 1);
+ }
+ }
+ }
+}
+
+void __init get_memcfg_numaq(void)
+{
+ smp_dump_qct();
+ initialize_physnode_map();
+}
--- linux-2.4.19pre8-cleanup/arch/i386/mm/Makefile Fri Dec 29 14:07:20 2000
+++ linux-2.4.19pre8-multi/arch/i386/mm/Makefile Thu May 9 17:21:37 2002
@@ -10,5 +10,6 @@
O_TARGET := mm.o
obj-y := init.o fault.o ioremap.o extable.o
+obj-$(CONFIG_DISCONTIGMEM) += discontig.o
include $(TOPDIR)/Rules.make
--- linux-2.4.19pre8-cleanup/arch/i386/mm/discontig.c Wed Dec 31 16:00:00 1969
+++ linux-2.4.19pre8-multi/arch/i386/mm/discontig.c Thu May 9 17:43:31 2002
@@ -0,0 +1,325 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/highmem.h>
+#include <asm/e820.h>
+#include <asm/setup.h>
+
+struct pfns {
+ unsigned long start_pfn;
+ unsigned long max_pfn;
+};
+
+plat_pg_data_t *plat_node_data[MAX_NUMNODES];
+bootmem_data_t plat_node_bdata;
+struct pfns plat_node_bootpfns[MAX_NUMNODES];
+
+extern unsigned long find_max_low_pfn(unsigned long *);
+extern unsigned long find_max_pfn(void);
+extern void pagetable_init (void);
+extern void kmap_init(void);
+extern void init_one_highpage(struct page *, int, int);
+extern inline int page_is_ram (unsigned long);
+
+extern unsigned long long nodes_mem_start[], nodes_mem_size[];
+extern struct e820map e820;
+extern char _end;
+extern unsigned long highend_pfn, highstart_pfn;
+extern unsigned long max_low_pfn;
+extern unsigned long totalram_pages;
+extern unsigned long totalhigh_pages;
+
+static void __init find_max_pfn_node(int nid, unsigned long system_max_pfn)
+{
+ unsigned long node_datasz;
+ unsigned long start, end;
+
+ start = plat_node_bootpfns[nid].start_pfn = PFN_UP(nodes_mem_start[nid]);
+ end = PFN_DOWN(nodes_mem_start[nid]) + PFN_DOWN(nodes_mem_size[nid]);
+
+ if (start >= end) {
+ BUG();
+ }
+ if (end > system_max_pfn) {
+ end = system_max_pfn;
+ }
+ plat_node_bootpfns[nid].max_pfn = end;
+
+ node_datasz = PFN_UP(sizeof(plat_pg_data_t));
+ PLAT_NODE_DATA(nid) = (plat_pg_data_t *)(__va(min_low_pfn << PAGE_SHIFT));
+ min_low_pfn += node_datasz;
+}
+
+static void __init register_bootmem_low_pages(unsigned long
system_max_low_pfn)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ unsigned long curr_pfn, last_pfn, size;
+ /*
+ * Reserve usable low memory
+ */
+ if (e820.map[i].type != E820_RAM)
+ continue;
+ /*
+ * We are rounding up the start address of usable memory:
+ */
+ curr_pfn = PFN_UP(e820.map[i].addr);
+ if (curr_pfn >= system_max_low_pfn)
+ continue;
+ /*
+ * ... and at the end of the usable range downwards:
+ */
+ last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
+
+ if (last_pfn > system_max_low_pfn)
+ last_pfn = system_max_low_pfn;
+
+ /*
+ * .. finally, did all the rounding and playing
+ * around just make the area go away?
+ */
+ if (last_pfn <= curr_pfn)
+ continue;
+
+ size = last_pfn - curr_pfn;
+ free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn), PFN_PHYS(size));
+ }
+}
+
+unsigned long __init setup_memory(void)
+{
+ int nid;
+ unsigned long bootmap_size, system_start_pfn, system_max_low_pfn,
system_max_pfn;
+
+ get_memcfg_numa();
+
+ /*
+ * partially used pages are not usable - thus
+ * we are rounding upwards:
+ */
+ system_start_pfn = min_low_pfn = PFN_UP(__pa(&_end));
+
+ system_max_pfn = find_max_pfn();
+ system_max_low_pfn = max_low_pfn = find_max_low_pfn(&system_max_pfn);
+
+#ifdef CONFIG_HIGHMEM
+ highstart_pfn = highend_pfn = system_max_pfn;
+ if (system_max_pfn > system_max_low_pfn) {
+ highstart_pfn = system_max_low_pfn;
+ }
+ printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+ pages_to_mb(highend_pfn - highstart_pfn));
+#endif
+ printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+ pages_to_mb(system_max_low_pfn));
+
+ for (nid = 0; nid < numnodes; nid++)
+ {
+ find_max_pfn_node(nid, system_max_pfn);
+
+ }
+
+ NODE_DATA(0)->bdata = &plat_node_bdata;
+
+ /*
+ * Initialize the boot-time allocator (with low memory only):
+ */
+ bootmap_size = init_bootmem_node(NODE_DATA(0), min_low_pfn, 0,
system_max_low_pfn);
+
+ register_bootmem_low_pages(system_max_low_pfn);
+
+ /*
+ * Reserve the bootmem bitmap itself as well. We do this in two
+ * steps (first step was init_bootmem()) because this catches
+ * the (very unlikely) case of us accidentally initializing the
+ * bootmem allocator with an invalid RAM area.
+ */
+ reserve_bootmem_node(NODE_DATA(0), HIGH_MEMORY, (PFN_PHYS(min_low_pfn) +
+ bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY));
+
+ /*
+ * reserve physical page 0 - it's a special BIOS page on many boxes,
+ * enabling clean reboots, SMP operation, laptop functions.
+ */
+ reserve_bootmem_node(NODE_DATA(0), 0, PAGE_SIZE);
+
+ /*
+ * But first pinch a few for the stack/trampoline stuff
+ * FIXME: Don't need the extra page at 4K, but need to fix
+ * trampoline before removing it. (see the GDT stuff)
+ */
+ reserve_bootmem_node(NODE_DATA(0), PAGE_SIZE, PAGE_SIZE);
+
+ /*
+ * Find and reserve possible boot-time SMP configuration:
+ */
+ find_smp_config();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (LOADER_TYPE && INITRD_START) {
+ if (INITRD_START + INITRD_SIZE <= (system_max_low_pfn << PAGE_SHIFT)) {
+ reserve_bootmem(INITRD_START, INITRD_SIZE);
+ initrd_start =
+ INITRD_START ? INITRD_START + PAGE_OFFSET : 0;
+ initrd_end = initrd_start+INITRD_SIZE;
+ }
+ else {
+ printk(KERN_ERR "initrd extends beyond end of memory "
+ "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+ INITRD_START + INITRD_SIZE,
+ system_max_low_pfn << PAGE_SHIFT);
+ initrd_start = 0;
+ }
+ }
+#endif
+
+ return system_max_low_pfn;
+}
+
+/*
+ * paging_init() sets up the page tables - note that the first 8MB are
+ * already mapped by head.S.
+ *
+ * This routines also unmaps the page at virtual kernel address 0, so
+ * that we can trap those pesky NULL-reference errors in the kernel.
+ */
+void __init paging_init(void)
+{
+
+ int nid;
+
+ pagetable_init();
+
+ __asm__( "movl %%ecx,%%cr3\n" ::"c"(__pa(swapper_pg_dir)));
+
+#if CONFIG_X86_PAE
+ /*
+ * We will bail out later - printk doesnt work right now so
+ * the user would just see a hanging kernel.
+ */
+ if (cpu_has_pae)
+ set_in_cr4(X86_CR4_PAE);
+#endif
+
+ __flush_tlb_all();
+
+#ifdef CONFIG_HIGHMEM
+ kmap_init();
+#endif
+
+ for (nid = 0; nid < numnodes; nid++) {
+ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+ unsigned int max_dma;
+
+ unsigned long low = max_low_pfn;
+ unsigned long high = plat_node_bootpfns[nid].max_pfn;
+ unsigned long start = plat_node_bootpfns[nid].start_pfn;
+
+ max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+
+ if (start > low) {
+#ifdef CONFIG_HIGHMEM
+ zones_size[ZONE_HIGHMEM] = high - start;
+#endif
+ } else {
+ if (low < max_dma)
+ zones_size[ZONE_DMA] = low;
+ else {
+ zones_size[ZONE_DMA] = max_dma;
+ zones_size[ZONE_NORMAL] = low - max_dma;
+#ifdef CONFIG_HIGHMEM
+ zones_size[ZONE_HIGHMEM] = high - low;
+#endif
+ }
+ }
+ free_area_init_node(nid, NODE_DATA(nid), 0, zones_size, start <<
PAGE_SHIFT, 0);
+ }
+ return;
+}
+
+
+int __init mem_init_free_pages(int bad_ppro)
+{
+ int reservedpages;
+ int nid;
+ unsigned long pfn;
+
+ bad_ppro = ppro_with_ram_bug();
+
+ /* this will put all low memory onto the freelists */
+ totalram_pages += free_all_bootmem_node(NODE_DATA(0));
+
+ reservedpages = 0;
+ for (pfn = 0; pfn < max_low_pfn; pfn++)
+ /*
+ * Only count reserved RAM pages
+ */
+ if (page_is_ram(pfn) && PageReserved(mem_map+pfn))
+ reservedpages++;
+#ifdef CONFIG_HIGHMEM
+ for (nid = 0; nid < numnodes; nid++) {
+ unsigned long node_pfn, node_high_size, zone_start_pfn;
+ struct page * zone_mem_map;
+
+ node_high_size = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].size;
+ zone_mem_map = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].zone_mem_map;
+ zone_start_pfn = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].zone_start_paddr >
> PAGE_SHIFT;
+
+ printk("Initializing highpages for node %d\n", nid);
+ for (node_pfn = 0; node_pfn < node_high_size; node_pfn++) {
+ init_one_highpage((struct page *) (zone_mem_map + node_pfn),
zone_start_pfn + node_pfn, bad_ppro);
+ }
+ }
+ totalram_pages += totalhigh_pages;
+#endif
+ return reservedpages;
+}
+
+void __init mem_init_set_max_mapnr(void)
+{
+ unsigned long lmax_mapnr;
+ int nid;
+
+#ifdef CONFIG_HIGHMEM
+ highmem_start_page = mem_map + NODE_DATA(0)->node_zones[ZONE_HIGHMEM].zone_st
art_mapnr;
+ num_physpages = highend_pfn;
+ num_mappedpages = max_low_pfn;
+
+ for (nid = 0; nid < numnodes; nid++) {
+ lmax_mapnr = PLAT_NODE_DATA_STARTNR(nid) + PLAT_NODE_DATA_SIZE(nid);
+ if (lmax_mapnr > max_mapnr) {
+ max_mapnr = lmax_mapnr;
+ }
+ }
+
+#else
+ max_mapnr = num_mappedpages = num_physpages = max_low_pfn;
+#endif
+}
--- linux-2.4.19pre8-cleanup/arch/i386/mm/init.c Thu May 9 17:27:22 2002
+++ linux-2.4.19pre8-multi/arch/i386/mm/init.c Thu May 9 17:21:37 2002
@@ -40,8 +40,8 @@
mmu_gather_t mmu_gathers[NR_CPUS];
unsigned long highstart_pfn, highend_pfn;
-static unsigned long totalram_pages;
-static unsigned long totalhigh_pages;
+unsigned long totalram_pages;
+unsigned long totalhigh_pages;
int do_check_pgt_cache(int low, int high)
{
@@ -202,7 +202,7 @@
}
}
-static void __init pagetable_init (void)
+void __init pagetable_init (void)
{
unsigned long vaddr, end;
pgd_t *pgd, *pgd_base;
@@ -320,6 +320,7 @@
flush_tlb_all();
}
+#ifndef CONFIG_DISCONTIGMEM
/*
* paging_init() sets up the page tables - note that the first 8MB are
* already mapped by head.S.
@@ -368,6 +369,7 @@
}
return;
}
+#endif /* !CONFIG_DISCONTIGMEM */
/*
* Test if the WP bit works in supervisor mode. It isn't supported on 386's
@@ -415,28 +417,6 @@
}
}
-static inline int page_is_ram (unsigned long pagenr)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- unsigned long addr, end;
-
- if (e820.map[i].type != E820_RAM) /* not usable memory */
- continue;
- /*
- * !!!FIXME!!! Some BIOSen report areas as RAM that
- * are not. Notably the 640->1Mb area. We need a sanity
- * check here.
- */
- addr = (e820.map[i].addr+PAGE_SIZE-1) >> PAGE_SHIFT;
- end = (e820.map[i].addr+e820.map[i].size) >> PAGE_SHIFT;
- if ((pagenr >= addr) && (pagenr < end))
- return 1;
- }
- return 0;
-}
-
static inline int page_kills_ppro(unsigned long pagenr)
{
if(pagenr >= 0x70000 && pagenr <= 0x7003F)
@@ -456,6 +436,7 @@
SetPageReserved(page);
}
+#ifndef CONFIG_DISCONTIGMEM
static int __init mem_init_free_pages(void)
{
extern int ppro_with_ram_bug(void);
@@ -483,13 +464,8 @@
return reservedpages;
}
-void __init mem_init(void)
+static void __init mem_init_set_max_mapnr(void)
{
- int codesize, reservedpages, datasize, initsize;
-
- if (!mem_map)
- BUG();
-
#ifdef CONFIG_HIGHMEM
highmem_start_page = mem_map + highstart_pfn;
max_mapnr = num_physpages = highend_pfn;
@@ -497,6 +473,19 @@
#else
max_mapnr = num_mappedpages = num_physpages = max_low_pfn;
#endif
+}
+
+#endif /* !CONFIG_DISCONTIGMEM */
+
+void __init mem_init(void)
+{
+ int codesize, reservedpages, datasize, initsize;
+
+ if (!mem_map)
+ BUG();
+
+ mem_init_set_max_mapnr();
+
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
/* clear the zero-page */
--- linux-2.4.19pre8-cleanup/include/asm-i386/page.h Tue May 7 11:54:43 2002
+++ linux-2.4.19pre8-multi/include/asm-i386/page.h Thu May 9 17:21:37 2002
@@ -131,8 +131,10 @@
#define MAXMEM ((unsigned long)(-PAGE_OFFSET-VMALLOC_RESERVE))
#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET)
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
+#ifndef CONFIG_DISCONTIGMEM
#define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT))
#define VALID_PAGE(page) ((page - mem_map) < max_mapnr)
+#endif /* !CONFIG_DISCONTIGMEM */
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
--- linux-2.4.19pre8-cleanup/include/asm-i386/io.h Tue May 7 11:54:43 2002
+++ linux-2.4.19pre8-multi/include/asm-i386/io.h Thu May 9 17:21:37 2002
@@ -100,10 +100,22 @@
* Change "struct page" to physical address.
*/
#ifdef CONFIG_HIGHMEM64G
+
+#ifndef CONFIG_DISCONTIGMEM
#define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT)
#else
+#define page_to_phys(page) (((u64)(page - page_zone(page)->zone_mem_map) <<
PAGE_SHIFT) + page_zone(page)->zone_start_paddr)
+#endif /* !CONFIG_DISCONTIGMEM */
+
+#else
+
+#ifndef CONFIG_DISCONTIGMEM
#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-#endif
+#else
+#define page_to_phys(page) (((page - page_zone(page)->zone_mem_map) <<
PAGE_SHIFT) + page_zone(page)->zone_start_paddr)
+#endif /* !CONFIG_DISCONTIGMEM */
+
+#endif /* CONFIG_HIGHMEM64G */
extern void * __ioremap(unsigned long offset, unsigned long size, unsigned
long flags);
--- linux-2.4.19pre8-cleanup/include/asm-i386/pgtable.h Tue May 7 11:54:43
2002
+++ linux-2.4.19pre8-multi/include/asm-i386/pgtable.h Thu May 9 17:21:37 2002
@@ -297,9 +297,12 @@
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*/
-
+#ifndef CONFIG_DISCONTIGMEM
#define mk_pte(page, pgprot) __mk_pte((page) - mem_map, (pgprot))
-
+#else
+#define mk_pte(page, pgprot) __mk_pte(((page) - page_zone(page)->zone_mem_map
+ (page_zone(page)->zone_start_paddr >> PAGE_SHIFT)), (pgprot))
+#endif /* !CONFIG_DISCONTIGMEM */
+
/* This takes a physical page address that is used by the remapping functions
*/
#define mk_pte_phys(physpage, pgprot) __mk_pte((physpage) >> PAGE_SHIFT,
pgprot)
@@ -351,7 +354,10 @@
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
#define PageSkip(page) (0)
+
+#ifndef CONFIG_DISCONTIGMEM
#define kern_addr_valid(addr) (1)
+#endif /* !CONFIG_DISCONTIGMEM */
#define io_remap_page_range remap_page_range
--- linux-2.4.19pre8-cleanup/include/asm-i386/pgtable-2level.h Thu Jul 26
13:40:32 2001
+++ linux-2.4.19pre8-multi/include/asm-i386/pgtable-2level.h Thu May 9
17:21:37 2002
@@ -56,7 +56,13 @@
}
#define ptep_get_and_clear(xp) __pte(xchg(&(xp)->pte_low, 0))
#define pte_same(a, b) ((a).pte_low == (b).pte_low)
+
+#ifndef CONFIG_DISCONTIGMEM
#define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> PAGE_SHIFT))))
+#else
+#define pte_page(x) (NODE_MEM_MAP(PHYSADDR_TO_NID((x).pte_low)) +
PLAT_NODE_DATA_LOCALNR(((unsigned long)((x).pte_low)),
PHYSADDR_TO_NID((x).pte_low)))
+#endif /* !CONFIG_DISCONTIGMEM */
+
#define pte_none(x) (!(x).pte_low)
#define __mk_pte(page_nr,pgprot) __pte(((page_nr) << PAGE_SHIFT) |
pgprot_val(pgprot))
--- linux-2.4.19pre8-cleanup/include/asm-i386/pgtable-3level.h Thu Jul 26
13:40:32 2001
+++ linux-2.4.19pre8-multi/include/asm-i386/pgtable-3level.h Thu May 9
17:21:37 2002
@@ -86,7 +86,13 @@
return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
}
+#ifndef CONFIG_DISCONTIGMEM
#define pte_page(x) (mem_map+(((x).pte_low >> PAGE_SHIFT) | ((x).pte_high <<
(32 - PAGE_SHIFT))))
+#else
+/* pte_page = lmem_map + nodelocal_pfn */
+#define pte_pfn(x) (((x).pte_low >> PAGE_SHIFT) | ((x).pte_high << (32 -
PAGE_SHIFT)))
+#define pte_page(x) (NODE_MEM_MAP(PFN_TO_NID(pte_pfn(x))) +
PLAT_NODE_DATA_LOCALNR(pte_pfn(x), PFN_TO_NID(pte_pfn(x))))
+#endif /* !CONFIG_DISCONTIGMEM */
#define pte_none(x) (!(x).pte_low && !(x).pte_high)
static inline pte_t __mk_pte(unsigned long page_nr, pgprot_t pgprot)
--- linux-2.4.19pre8-cleanup/include/asm-i386/setup.h Fri Nov 12 10:12:11 1999
+++ linux-2.4.19pre8-multi/include/asm-i386/setup.h Thu May 9 17:21:37 2002
@@ -1,10 +1,14 @@
-/*
- * Just a place holder. We don't want to have to test x86 before
- * we include stuff
- */
-
#ifndef _i386_SETUP_H
#define _i386_SETUP_H
+#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
+
+/*
+ * Reserved space for vmalloc and iomap - defined in asm/page.h
+ */
+#define MAXMEM_PFN PFN_DOWN(MAXMEM)
+#define MAX_NONPAE_PFN (1 << 20)
#endif /* _i386_SETUP_H */
--- linux-2.4.19pre8-cleanup/include/asm-i386/mmzone.h Wed Dec 31 16:00:00 1969
+++ linux-2.4.19pre8-multi/include/asm-i386/mmzone.h Thu May 9 17:21:37 2002
@@ -0,0 +1,103 @@
+/*
+ * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002
+ *
+ */
+
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#ifdef CONFIG_X86_NUMAQ
+#include <asm/numaq.h>
+#else
+#define PHYSADDR_TO_NID(pa) (0)
+#define PFN_TO_NID(pfn) (0)
+#define MAX_NUMNODES 1
+#ifdef CONFIG_NUMA
+#define _cpu_to_node(cpu) 0
+#endif /* CONFIG_NUMA */
+#endif /* CONFIG_X86_NUMAQ */
+
+#ifdef CONFIG_NUMA
+#define numa_node_id() _cpu_to_node(smp_processor_id())
+#endif /* CONFIG_NUMA */
+
+typedef struct plat_pglist_data {
+ pg_data_t gendata;
+} plat_pg_data_t;
+
+extern plat_pg_data_t *plat_node_data[];
+
+/*
+ * Following are macros that are specific to this numa platform.
+ */
+#define reserve_bootmem(addr, size) \
+ reserve_bootmem_node(NODE_DATA(0), (addr), (size))
+#define alloc_bootmem(x) \
+ __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES,
__pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low(x) \
+ __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0)
+#define alloc_bootmem_pages(x) \
+ __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low_pages(x) \
+ __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
+#define alloc_bootmem_node(ignore, x) \
+ __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES,
__pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_node(ignore, x) \
+ __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_low_pages_node(ignore, x) \
+ __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
+
+#define PLAT_NODE_DATA(n) (plat_node_data[(n)])
+#define PLAT_NODE_DATA_STARTNR(n) \
+ (PLAT_NODE_DATA(n)->gendata.node_start_mapnr)
+#define PLAT_NODE_DATA_SIZE(n) (PLAT_NODE_DATA(n)->gendata.node_size)
+#define PLAT_NODE_DATA_LOCALNR(p, n) \
+ (((p) - PLAT_NODE_DATA(n)->gendata.node_start_paddr) >> PAGE_SHIFT)
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(kaddr) PHYSADDR_TO_NID(__pa(kaddr))
+
+/*
+ * Return a pointer to the node data for node n.
+ */
+#define NODE_DATA(n) (&((PLAT_NODE_DATA(n))->gendata))
+
+/*
+ * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
+ */
+#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map)
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and returns the the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr) \
+ NODE_MEM_MAP(KVADDR_TO_NID((unsigned long)(kaddr)))
+
+/*
+ * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory
+ * and returns the kaddr corresponding to first physical page in the
+ * node's mem_map.
+ */
+#define LOCAL_BASE_ADDR(kaddr) ((unsigned long)__va(NODE_DATA(KVADDR_TO_NID(ka
ddr))->node_start_paddr))
+
+#define LOCAL_MAP_NR(kvaddr) \
+ (((unsigned long)(kvaddr)-LOCAL_BASE_ADDR(kvaddr)) >> PAGE_SHIFT)
+
+#define kern_addr_valid(kaddr) test_bit(LOCAL_MAP_NR(kaddr), \
+ NODE_DATA(KVADDR_TO_NID(kaddr))->valid_addr_bitmap)
+
+#define virt_to_page(kaddr) (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
+/* This does not check the holes between lmem_maps */
+#define VALID_PAGE(page) (((page) - mem_map) < max_mapnr)
+
+#endif /* CONFIG_DISCONTIGMEM */
+#endif /* _ASM_MMZONE_H_ */
--- linux-2.4.19pre8-cleanup/include/asm-i386/numaq.h Wed Dec 31 16:00:00 1969
+++ linux-2.4.19pre8-multi/include/asm-i386/numaq.h Thu May 9 17:21:37 2002
@@ -0,0 +1,179 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+
+#ifndef NUMAQ_H
+#define NUMAQ_H
+
+#ifdef CONFIG_X86_NUMAQ
+
+#include <asm/smpboot.h>
+
+/*
+ * for now assume that 8Gb is max amount of RAM for whole system
+ * 8Gb * 1024Mb/Gb = 8192 Mb
+ * 8192 Mb / 256Mb = 32
+ */
+#define MAX_ELEMENTS 32
+#define ELEMENT_REPRESENTS 8 /* 256 Mb */
+
+#define PHYSADDR_TO_NID(pa) numaqpa_to_nid(pa)
+#define PFN_TO_NID(pa) numaqpfn_to_nid(pa)
+#define MAX_NUMNODES 8
+#ifdef CONFIG_NUMA
+#define _cpu_to_node(cpu) (cpu_to_logical_apicid(cpu) >> 4)
+#endif /* CONFIG_NUMA */
+extern int numaqpa_to_nid(unsigned long long);
+extern int numaqpfn_to_nid(unsigned long);
+extern void get_memcfg_numaq(void);
+#define get_memcfg_numa() get_memcfg_numaq()
+
+/*
+ * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are
the
+ */
+#define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private quad
space */
+
+/*
+ * Communication area for each processor on lynxer-processor tests.
+ *
+ * NOTE: If you change the size of this eachproc structure you need
+ * to change the definition for EACH_QUAD_SIZE.
+ */
+struct eachquadmem {
+ unsigned int priv_mem_start; /* Starting address of this */
+ /* quad's private memory. */
+ /* This is always 0. */
+ /* In MB. */
+ unsigned int priv_mem_size; /* Size of this quad's */
+ /* private memory. */
+ /* In MB. */
+ unsigned int low_shrd_mem_strp_start;/* Starting address of this */
+ /* quad's low shared block */
+ /* (untranslated). */
+ /* In MB. */
+ unsigned int low_shrd_mem_start; /* Starting address of this */
+ /* quad's low shared memory */
+ /* (untranslated). */
+ /* In MB. */
+ unsigned int low_shrd_mem_size; /* Size of this quad's low */
+ /* shared memory. */
+ /* In MB. */
+ unsigned int lmmio_copb_start; /* Starting address of this */
+ /* quad's local memory */
+ /* mapped I/O in the */
+ /* compatibility OPB. */
+ /* In MB. */
+ unsigned int lmmio_copb_size; /* Size of this quad's local */
+ /* memory mapped I/O in the */
+ /* compatibility OPB. */
+ /* In MB. */
+ unsigned int lmmio_nopb_start; /* Starting address of this */
+ /* quad's local memory */
+ /* mapped I/O in the */
+ /* non-compatibility OPB. */
+ /* In MB. */
+ unsigned int lmmio_nopb_size; /* Size of this quad's local */
+ /* memory mapped I/O in the */
+ /* non-compatibility OPB. */
+ /* In MB. */
+ unsigned int io_apic_0_start; /* Starting address of I/O */
+ /* APIC 0. */
+ unsigned int io_apic_0_sz; /* Size I/O APIC 0. */
+ unsigned int io_apic_1_start; /* Starting address of I/O */
+ /* APIC 1. */
+ unsigned int io_apic_1_sz; /* Size I/O APIC 1. */
+ unsigned int hi_shrd_mem_start; /* Starting address of this */
+ /* quad's high shared memory.*/
+ /* In MB. */
+ unsigned int hi_shrd_mem_size; /* Size of this quad's high */
+ /* shared memory. */
+ /* In MB. */
+ unsigned int mps_table_addr; /* Address of this quad's */
+ /* MPS tables from BIOS, */
+ /* in system space.*/
+ unsigned int lcl_MDC_pio_addr; /* Port-I/O address for */
+ /* local access of MDC. */
+ unsigned int rmt_MDC_mmpio_addr; /* MM-Port-I/O address for */
+ /* remote access of MDC. */
+ unsigned int mm_port_io_start; /* Starting address of this */
+ /* quad's memory mapped Port */
+ /* I/O space. */
+ unsigned int mm_port_io_size; /* Size of this quad's memory*/
+ /* mapped Port I/O space. */
+ unsigned int mm_rmt_io_apic_start; /* Starting address of this */
+ /* quad's memory mapped */
+ /* remote I/O APIC space. */
+ unsigned int mm_rmt_io_apic_size; /* Size of this quad's memory*/
+ /* mapped remote I/O APIC */
+ /* space. */
+ unsigned int mm_isa_start; /* Starting address of this */
+ /* quad's memory mapped ISA */
+ /* space (contains MDC */
+ /* memory space). */
+ unsigned int mm_isa_size; /* Size of this quad's memory*/
+ /* mapped ISA space (contains*/
+ /* MDC memory space). */
+ unsigned int rmt_qmi_addr; /* Remote addr to access QMI.*/
+ unsigned int lcl_qmi_addr; /* Local addr to access QMI. */
+};
+
+/*
+ * Note: This structure must be NOT be changed unless the multiproc and
+ * OS are changed to reflect the new structure.
+ */
+struct sys_cfg_data {
+ unsigned int quad_id;
+ unsigned int bsp_proc_id; /* Boot Strap Processor in this quad. */
+ unsigned int scd_version; /* Version number of this table. */
+ unsigned int first_quad_id;
+ unsigned int quads_present31_0; /* 1 bit for each quad */
+ unsigned int quads_present63_32; /* 1 bit for each quad */
+ unsigned int config_flags;
+ unsigned int boot_flags;
+ unsigned int csr_start_addr; /* Absolute value (not in MB) */
+ unsigned int csr_size; /* Absolute value (not in MB) */
+ unsigned int lcl_apic_start_addr; /* Absolute value (not in MB) */
+ unsigned int lcl_apic_size; /* Absolute value (not in MB) */
+ unsigned int low_shrd_mem_base; /* 0 or 512MB or 1GB */
+ unsigned int low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
+ /* may not be totally populated */
+ unsigned int split_mem_enbl; /* 0 for no low shared memory */
+ unsigned int mmio_sz; /* Size of total system memory mapped I/O */
+ /* (in MB). */
+ unsigned int quad_spin_lock; /* Spare location used for quad */
+ /* bringup. */
+ unsigned int nonzero55; /* For checksumming. */
+ unsigned int nonzeroaa; /* For checksumming. */
+ unsigned int scd_magic_number;
+ unsigned int system_type;
+ unsigned int checksum;
+ /*
+ * memory configuration area for each quad
+ */
+ struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */
+};
+
+#endif /* CONFIG_X86_NUMAQ */
+#endif /* NUMAQ_H */
+
--- linux-2.4.19pre8-cleanup/include/asm-i386/e820.h Fri Aug 18 09:30:51 2000
+++ linux-2.4.19pre8-multi/include/asm-i386/e820.h Thu May 9 17:21:37 2002
@@ -35,6 +35,29 @@
};
extern struct e820map e820;
+
+static inline int page_is_ram (unsigned long pagenr)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ unsigned long addr, end;
+
+ if (e820.map[i].type != E820_RAM) /* not usable memory */
+ continue;
+ /*
+ * !!!FIXME!!! Some BIOSen report areas as RAM that
+ * are not. Notably the 640->1Mb area. We need a sanity
+ * check here.
+ */
+ addr = (e820.map[i].addr+PAGE_SIZE-1) >> PAGE_SHIFT;
+ end = (e820.map[i].addr+e820.map[i].size) >> PAGE_SHIFT;
+ if ((pagenr >= addr) && (pagenr < end))
+ return 1;
+ }
+ return 0;
+}
+
#endif/*!__ASSEMBLY__*/
#endif/*__E820_HEADER*/
--- linux-2.4.19pre8-cleanup/include/linux/bootmem.h Thu Apr 18 16:24:17 2002
+++ linux-2.4.19pre8-multi/include/linux/bootmem.h Thu May 9 17:25:56 2002
@@ -31,9 +31,10 @@
extern unsigned long __init bootmem_bootmap_pages (unsigned long);
extern unsigned long __init init_bootmem (unsigned long addr, unsigned long
memend);
-extern void __init reserve_bootmem (unsigned long addr, unsigned long size);
extern void __init free_bootmem (unsigned long addr, unsigned long size);
extern void * __init __alloc_bootmem (unsigned long size, unsigned long
align, unsigned long goal);
+#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
+extern void __init reserve_bootmem (unsigned long addr, unsigned long size);
#define alloc_bootmem(x) \
__alloc_bootmem((x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_low(x) \
@@ -42,6 +43,7 @@
__alloc_bootmem((x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_low_pages(x) \
__alloc_bootmem((x), PAGE_SIZE, 0)
+#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
extern unsigned long __init free_all_bootmem (void);
extern unsigned long __init init_bootmem_node (pg_data_t *pgdat, unsigned
long freepfn, unsigned long startpfn, unsigned long endpfn);
@@ -49,11 +51,13 @@
extern void __init free_bootmem_node (pg_data_t *pgdat, unsigned long addr,
unsigned long size);
extern unsigned long __init free_all_bootmem_node (pg_data_t *pgdat);
extern void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long
size, unsigned long align, unsigned long goal);
+#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
#define alloc_bootmem_node(pgdat, x) \
__alloc_bootmem_node((pgdat), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_pages_node(pgdat, x) \
__alloc_bootmem_node((pgdat), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_low_pages_node(pgdat, x) \
__alloc_bootmem_node((pgdat), (x), PAGE_SIZE, 0)
+#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
#endif /* _LINUX_BOOTMEM_H */
--- linux-2.4.19pre8-cleanup/mm/bootmem.c Fri Dec 21 09:42:04 2001
+++ linux-2.4.19pre8-multi/mm/bootmem.c Thu May 9 17:24:46 2002
@@ -306,10 +306,12 @@
return(init_bootmem_core(&contig_page_data, start, 0, pages));
}
+#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
void __init reserve_bootmem (unsigned long addr, unsigned long size)
{
reserve_bootmem_core(contig_page_data.bdata, addr, size);
}
+#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
void __init free_bootmem (unsigned long addr, unsigned long size)
{
--- linux-2.4.19pre8-cleanup/Documentation/Configure.help Tue May 7 11:54:02
2002
+++ linux-2.4.19pre8-multi/Documentation/Configure.help Thu May 9 17:21:37
2002
@@ -234,7 +234,7 @@
Axis Communication site, <http://developer.axis.com/>.
Multiquad support for NUMA systems
-CONFIG_MULTIQUAD
+CONFIG_X86_NUMAQ
This option is used for getting Linux to run on a (IBM/Sequent) NUMA
multiquad box. This changes the way that processors are bootstrapped,
and uses Clustered Logical APIC addressing mode instead of Flat Logical.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/