amd-pstate CPU Performance Scaling Driver¶
- Copyright:
© 2021 Advanced Micro Devices, Inc.
- Author:
Huang Rui <ray.huang@amd.com>
Introduction¶
amd-pstate is the AMD CPU performance scaling driver that introduces a
new CPU frequency control mechanism on modern AMD APU and CPU series in
Linux kernel. The new mechanism is based on Collaborative Processor
Performance Control (CPPC) which provides finer grain frequency management
than legacy ACPI hardware P-States. Current AMD CPU/APU platforms are using
the ACPI P-states driver to manage CPU frequency and clocks with switching
only in 3 P-states. CPPC replaces the ACPI P-states controls and allows a
flexible, low-latency interface for the Linux kernel to directly
communicate the performance hints to hardware.
amd-pstate leverages the Linux kernel governors such as schedutil,
ondemand, etc. to manage the performance hints which are provided by
CPPC hardware functionality that internally follows the hardware
specification (for details refer to AMD64 Architecture Programmer’s Manual
Volume 2: System Programming [1]). Currently, amd-pstate supports basic
frequency control function according to kernel governors on some of the
Zen2 and Zen3 processors, and we will implement more AMD specific functions
in future after we verify them on the hardware and SBIOS.
AMD CPPC Overview¶
Collaborative Processor Performance Control (CPPC) interface enumerates a
continuous, abstract, and unit-less performance value in a scale that is
not tied to a specific performance state / frequency. This is an ACPI
standard [2] which software can specify application performance goals and
hints as a relative target to the infrastructure limits. AMD processors
provide the low latency register model (MSR) instead of an AML code
interpreter for performance adjustments. amd-pstate will initialize a
struct cpufreq_driver instance, amd_pstate_driver, with the callbacks
to manage each performance update behavior.
Highest Perf ------>+-----------------------+ +-----------------------+
| | | |
| | | |
| | Max Perf ---->| |
| | | |
| | | |
Nominal Perf ------>+-----------------------+ +-----------------------+
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | Desired Perf ---->| |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
Lowest non- | | | |
linear perf ------>+-----------------------+ +-----------------------+
| | | |
| | Lowest perf ---->| |
| | | |
Lowest perf ------>+-----------------------+ +-----------------------+
| | | |
| | | |
| | | |
0 ------>+-----------------------+ +-----------------------+
AMD P-States Performance Scale
AMD CPPC Performance Capability¶
Highest Performance (RO)¶
This is the absolute maximum performance an individual processor may reach, assuming ideal conditions. This performance level may not be sustainable for long durations and may only be achievable if other platform components are in a specific state; for example, it may require other processors to be in an idle state. This would be equivalent to the highest frequencies supported by the processor.
Nominal (Guaranteed) Performance (RO)¶
This is the maximum sustained performance level of the processor, assuming ideal operating conditions. In the absence of an external constraint (power, thermal, etc.), this is the performance level the processor is expected to be able to maintain continuously. All cores/processors are expected to be able to sustain their nominal performance state simultaneously.
Lowest non-linear Performance (RO)¶
This is the lowest performance level at which nonlinear power savings are
achieved, for example, due to the combined effects of voltage and frequency
scaling. Above this threshold, lower performance levels should be generally
more energy efficient than higher performance levels. This register
effectively conveys the most efficient performance level to amd-pstate.
Lowest Performance (RO)¶
This is the absolute lowest performance level of the processor. Selecting a performance level lower than the lowest nonlinear performance level may cause an efficiency penalty but should reduce the instantaneous power consumption of the processor.
AMD CPPC Performance Control¶
amd-pstate passes performance goals through these registers. The
register drives the behavior of the desired performance target.
Minimum requested performance (RW)¶
amd-pstate specifies the minimum allowed performance level.
Maximum requested performance (RW)¶
amd-pstate specifies a limit the maximum performance that is expected
to be supplied by the hardware.
Desired performance target (RW)¶
amd-pstate specifies a desired target in the CPPC performance scale as
a relative number. This can be expressed as percentage of nominal
performance (infrastructure max). Below the nominal sustained performance
level, desired performance expresses the average performance level of the
processor subject to hardware. Above the nominal performance level,
the processor must provide at least nominal performance requested and go higher
if current operating conditions allow.
Energy Performance Preference (EPP) (RW)¶
This attribute provides a hint to the hardware if software wants to bias toward performance (0x0) or energy efficiency (0xff).
Key Governors Support¶
amd-pstate can be used with all the (generic) scaling governors listed
by the scaling_available_governors policy attribute in sysfs. Then,
it is responsible for the configuration of policy objects corresponding to
CPUs and provides the CPUFreq core (and the scaling governors attached
to the policy objects) with accurate information on the maximum and minimum
operating frequencies supported by the hardware. Users can check the
scaling_cur_freq information comes from the CPUFreq core.
amd-pstate mainly supports schedutil and ondemand for dynamic
frequency control. It is to fine tune the processor configuration on
amd-pstate to the schedutil with CPU CFS scheduler. amd-pstate
registers the adjust_perf callback to implement performance update behavior
similar to CPPC. It is initialized by sugov_start and then populates the
CPU’s update_util_data pointer to assign sugov_update_single_perf as the
utilization update callback function in the CPU scheduler. The CPU scheduler
will call cpufreq_update_util and assigns the target performance according
to the struct sugov_cpu that the utilization update belongs to.
Then, amd-pstate updates the desired performance according to the CPU
scheduler assigned.
Processor Support¶
The amd-pstate initialization will fail if the _CPC entry in the ACPI
SBIOS does not exist in the detected processor. It uses acpi_cpc_valid
to check the existence of _CPC. All Zen based processors support the legacy
ACPI hardware P-States function, so when amd-pstate fails initialization,
the kernel will fall back to initialize the acpi-cpufreq driver.
There are two types of hardware implementations for amd-pstate: one is
Full MSR Support and another is Shared Memory Support. It can use the X86_FEATURE_CPPC feature flag to
indicate the different types. (For details, refer to the Processor Programming
Reference (PPR) for AMD Family 19h Model 51h, Revision A1 Processors [3].)
amd-pstate is to register different static_call instances for different
hardware implementations.
Currently, some of the Zen2 and Zen3 processors support amd-pstate. In the
future, it will be supported on more and more AMD processors.
Full MSR Support¶
Some new Zen3 processors such as Cezanne provide the MSR registers directly
while the X86_FEATURE_CPPC CPU feature flag is set.
amd-pstate can handle the MSR register to implement the fast switch
function in CPUFreq that can reduce the latency of frequency control in
interrupt context. The functions with a pstate_xxx prefix represent the
operations on MSR registers.
User Space Interface in sysfs - Per-policy control¶
amd-pstate exposes several global attributes (files) in sysfs to
control its functionality at the system level. They are located in the
/sys/devices/system/cpu/cpufreq/policyX/ directory and affect all CPUs.
root@hr-test1:/home/ray# ls /sys/devices/system/cpu/cpufreq/policy0/*amd*
/sys/devices/system/cpu/cpufreq/policy0/amd_pstate_highest_perf
/sys/devices/system/cpu/cpufreq/policy0/amd_pstate_lowest_nonlinear_freq
/sys/devices/system/cpu/cpufreq/policy0/amd_pstate_max_freq
amd_pstate_highest_perf / amd_pstate_max_freq
Maximum CPPC performance and CPU frequency that the driver is allowed to
set, in percent of the maximum supported CPPC performance level (the highest
performance supported in AMD CPPC Performance Capability).
In some ASICs, the highest CPPC performance is not the one in the _CPC
table, so we need to expose it to sysfs. If boost is not active, but
still supported, this maximum frequency will be larger than the one in
cpuinfo.
This attribute is read-only.
amd_pstate_lowest_nonlinear_freq
The lowest non-linear CPPC CPU frequency that the driver is allowed to set, in percent of the maximum supported CPPC performance level. (Please see the lowest non-linear performance in AMD CPPC Performance Capability.) This attribute is read-only.
energy_performance_available_preferences
A list of all the supported EPP preferences that could be used for
energy_performance_preference on this system.
These profiles represent different hints that are provided
to the low-level firmware about the user’s desired energy vs efficiency
tradeoff. default represents the epp value is set by platform
firmware. This attribute is read-only.
energy_performance_preference
The current energy performance preference can be read from this attribute.
and user can change current preference according to energy or performance needs
Please get all support profiles list from
energy_performance_available_preferences attribute, all the profiles are
integer values defined between 0 to 255 when EPP feature is enabled by platform
firmware, if EPP feature is disabled, driver will ignore the written value
This attribute is read-write.
Other performance and frequency values can be read back from
/sys/devices/system/cpu/cpuX/acpi_cppc/, see CPPC.
amd-pstate vs acpi-cpufreq¶
On the majority of AMD platforms supported by acpi-cpufreq, the ACPI tables
provided by the platform firmware are used for CPU performance scaling, but
only provide 3 P-states on AMD processors.
However, on modern AMD APU and CPU series, hardware provides the Collaborative
Processor Performance Control according to the ACPI protocol and customizes this
for AMD platforms. That is, fine-grained and continuous frequency ranges
instead of the legacy hardware P-states. amd-pstate is the kernel
module which supports the new AMD P-States mechanism on most of the future AMD
platforms. The AMD P-States mechanism is the more performance and energy
efficiency frequency management method on AMD processors.
amd-pstate Driver Operation Modes¶
amd_pstate CPPC has 3 operation modes: autonomous (active) mode,
non-autonomous (passive) mode and guided autonomous (guided) mode.
Active/passive/guided mode can be chosen by different kernel parameters.
In autonomous mode, platform ignores the desired performance level request and takes into account only the values set to the minimum, maximum and energy performance preference registers.
In non-autonomous mode, platform gets desired performance level from OS directly through Desired Performance Register.
In guided-autonomous mode, platform sets operating performance level autonomously according to the current workload and within the limits set by OS through min and max performance registers.
Active Mode¶
amd_pstate=active
This is the low-level firmware control mode which is implemented by amd_pstate_epp
driver with amd_pstate=active passed to the kernel in the command line.
In this mode, amd_pstate_epp driver provides a hint to the hardware if software
wants to bias toward performance (0x0) or energy efficiency (0xff) to the CPPC firmware.
then CPPC power algorithm will calculate the runtime workload and adjust the realtime
cores frequency according to the power supply and thermal, core voltage and some other
hardware conditions.
Passive Mode¶
amd_pstate=passive
It will be enabled if the amd_pstate=passive is passed to the kernel in the command line.
In this mode, amd_pstate driver software specifies a desired QoS target in the CPPC
performance scale as a relative number. This can be expressed as percentage of nominal
performance (infrastructure max). Below the nominal sustained performance level,
desired performance expresses the average performance level of the processor subject
to the Performance Reduction Tolerance register. Above the nominal performance level,
processor must provide at least nominal performance requested and go higher if current
operating conditions allow.
Guided Mode¶
amd_pstate=guided
If amd_pstate=guided is passed to kernel command line option then this mode
is activated. In this mode, driver requests minimum and maximum performance
level and the platform autonomously selects a performance level in this range
and appropriate to the current workload.
amd-pstate Preferred Core¶
The core frequency is subjected to the process variation in semiconductors. Not all cores are able to reach the maximum frequency respecting the infrastructure limits. Consequently, AMD has redefined the concept of maximum frequency of a part. This means that a fraction of cores can reach maximum frequency. To find the best process scheduling policy for a given scenario, OS needs to know the core ordering informed by the platform through highest performance capability register of the CPPC interface.
amd-pstate preferred core enables the scheduler to prefer scheduling on
cores that can achieve a higher frequency with lower voltage. The preferred
core rankings can dynamically change based on the workload, platform conditions,
thermals and ageing.
The priority metric will be initialized by the amd-pstate driver. The amd-pstate
driver will also determine whether or not amd-pstate preferred core is
supported by the platform.
amd-pstate driver will provide an initial core ordering when the system boots.
The platform uses the CPPC interfaces to communicate the core ranking to the
operating system and scheduler to make sure that OS is choosing the cores
with highest performance firstly for scheduling the process. When amd-pstate
driver receives a message with the highest performance change, it will
update the core ranking and set the cpu’s priority.
amd-pstate Preferred Core Switch¶
Kernel Parameters¶
amd-pstate peferred core`` has two states: enable and disable.
Enable/disable states can be chosen by different kernel parameters.
Default enable amd-pstate preferred core.
amd_prefcore=disable
For systems that support amd-pstate preferred core, the core rankings will
always be advertised by the platform. But OS can choose to ignore that via the
kernel parameter amd_prefcore=disable.
User Space Interface in sysfs - General¶
Global Attributes¶
amd-pstate exposes several global attributes (files) in sysfs to
control its functionality at the system level. They are located in the
/sys/devices/system/cpu/amd_pstate/ directory and affect all CPUs.
statusOperation mode of the driver: “active”, “passive” or “disable”.
- “active”
The driver is functional and in the
active mode- “passive”
The driver is functional and in the
passive mode- “guided”
The driver is functional and in the
guided mode- “disable”
The driver is unregistered and not functional now.
This attribute can be written to in order to change the driver’s operation mode or to unregister it. The string written to it must be one of the possible values of it and, if successful, writing one of these values to the sysfs file will cause the driver to switch over to the operation mode represented by that string - or to be unregistered in the “disable” case.
prefcorePreferred core state of the driver: “enabled” or “disabled”.
- “enabled”
Enable the
amd-pstatepreferred core.- “disabled”
Disable the
amd-pstatepreferred core
This attribute is read-only to check the state of preferred core set by the kernel parameter.
cpupower tool support for amd-pstate¶
amd-pstate is supported by the cpupower tool, which can be used to dump
frequency information. Development is in progress to support more and more
operations for the new amd-pstate module with this tool.
root@hr-test1:/home/ray# cpupower frequency-info
analyzing CPU 0:
driver: amd-pstate
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 131 us
hardware limits: 400 MHz - 4.68 GHz
available cpufreq governors: ondemand conservative powersave userspace performance schedutil
current policy: frequency should be within 400 MHz and 4.68 GHz.
The governor "schedutil" may decide which speed to use
within this range.
current CPU frequency: Unable to call hardware
current CPU frequency: 4.02 GHz (asserted by call to kernel)
boost state support:
Supported: yes
Active: yes
AMD PSTATE Highest Performance: 166. Maximum Frequency: 4.68 GHz.
AMD PSTATE Nominal Performance: 117. Nominal Frequency: 3.30 GHz.
AMD PSTATE Lowest Non-linear Performance: 39. Lowest Non-linear Frequency: 1.10 GHz.
AMD PSTATE Lowest Performance: 15. Lowest Frequency: 400 MHz.
Diagnostics and Tuning¶
Trace Events¶
There are two static trace events that can be used for amd-pstate
diagnostics. One of them is the cpu_frequency trace event generally used
by CPUFreq, and the other one is the amd_pstate_perf trace event
specific to amd-pstate. The following sequence of shell commands can
be used to enable them and see their output (if the kernel is
configured to support event tracing).
root@hr-test1:/home/ray# cd /sys/kernel/tracing/
root@hr-test1:/sys/kernel/tracing# echo 1 > events/amd_cpu/enable
root@hr-test1:/sys/kernel/tracing# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 47827/42233061 #P:2
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [015] dN... 4995.979886: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=15 changed=false fast_switch=true
<idle>-0 [007] d.h.. 4995.979893: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true
cat-2161 [000] d.... 4995.980841: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=0 changed=false fast_switch=true
sshd-2125 [004] d.s.. 4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=4 changed=false fast_switch=true
<idle>-0 [007] d.s.. 4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true
<idle>-0 [003] d.s.. 4995.980971: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=3 changed=false fast_switch=true
<idle>-0 [011] d.s.. 4995.980996: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=11 changed=false fast_switch=true
The cpu_frequency trace event will be triggered either by the schedutil scaling
governor (for the policies it is attached to), or by the CPUFreq core (for the
policies with other scaling governors).
Tracer Tool¶
amd_pstate_tracer.py can record and parse amd-pstate trace log, then
generate performance plots. This utility can be used to debug and tune the
performance of amd-pstate driver. The tracer tool needs to import intel
pstate tracer.
Tracer tool located in linux/tools/power/x86/amd_pstate_tracer. It can be
used in two ways. If trace file is available, then directly parse the file
with command
./amd_pstate_trace.py [-c cpus] -t <trace_file> -n <test_name>
Or generate trace file with root privilege, then parse and plot with command
sudo ./amd_pstate_trace.py [-c cpus] -n <test_name> -i <interval> [-m kbytes]
The test result can be found in results/test_name. Following is the example
about part of the output.
common_cpu common_secs common_usecs min_perf des_perf max_perf freq mperf apef tsc load duration_ms sample_num elapsed_time common_comm
CPU_005 712 116384 39 49 166 0.7565 9645075 2214891 38431470 25.1 11.646 469 2.496 kworker/5:0-40
CPU_006 712 116408 39 49 166 0.6769 8950227 1839034 37192089 24.06 11.272 470 2.496 kworker/6:0-1264
Unit Tests for amd-pstate¶
amd-pstate-ut is a test module for testing the amd-pstate driver.
It can help all users to verify their processor support (SBIOS/Firmware or Hardware).
Kernel can have a basic function test to avoid the kernel regression during the update.
We can introduce more functional or performance tests to align the result together, it will benefit power and performance scale optimization.
Test case descriptions
1). Basic tests
Test prerequisite and basic functions for the
amd-pstatedriver.Index
Functions
Description
1
amd_pstate_ut_acpi_cpc_valid
2
amd_pstate_ut_check_enabled
Check whether AMD P-State is enabled.AMD P-States and ACPI hardware P-States always can be supported in one processor. But AMD P-States has the higher priority and if it is enabled withMSR_AMD_CPPC_ENABLEorcppc_set_enable, it will respond to the request from AMD P-States.3
amd_pstate_ut_check_perf
Check if the each performance values are reasonable.highest_perf >= nominal_perf > lowest_nonlinear_perf > lowest_perf > 0.4
amd_pstate_ut_check_freq
Check if the each frequency values and max freq when set support boost mode are reasonable.max_freq >= nominal_freq > lowest_nonlinear_freq > min_freq > 0If boost is not active but supported, this maximum frequency will be larger than the one incpuinfo.2). Tbench test
Test and monitor the cpu changes when running tbench benchmark under the specified governor. These changes include desire performance, frequency, load, performance, energy etc. The specified governor is ondemand or schedutil. Tbench can also be tested on the
acpi-cpufreqkernel driver for comparison.3). Gitsource test
Test and monitor the cpu changes when running gitsource benchmark under the specified governor. These changes include desire performance, frequency, load, time, energy etc. The specified governor is ondemand or schedutil. Gitsource can also be tested on the
acpi-cpufreqkernel driver for comparison.How to execute the tests
We use test module in the kselftest frameworks to implement it. We create
amd-pstate-utmodule and tie it into kselftest.(for details refer to Linux Kernel Selftests [4]).1). Build
open the
CONFIG_X86_AMD_PSTATEconfiguration option.set the
CONFIG_X86_AMD_PSTATE_UTconfiguration option to M.make project
make selftest
$ cd linux $ make -C tools/testing/selftests
make perf
$ cd tools/perf/ $ make
2). Installation & Steps
$ make -C tools/testing/selftests install INSTALL_PATH=~/kselftest $ cp tools/perf/perf /usr/bin/perf $ sudo ./kselftest/run_kselftest.sh -c amd-pstate
3). Specified test case
$ cd ~/kselftest/amd-pstate $ sudo ./run.sh -t basic $ sudo ./run.sh -t tbench $ sudo ./run.sh -t tbench -m acpi-cpufreq $ sudo ./run.sh -t gitsource $ sudo ./run.sh -t gitsource -m acpi-cpufreq $ ./run.sh --help ./run.sh: illegal option -- - Usage: ./run.sh [OPTION...] [-h <help>] [-o <output-file-for-dump>] [-c <all: All testing, basic: Basic testing, tbench: Tbench testing, gitsource: Gitsource testing.>] [-t <tbench time limit>] [-p <tbench process number>] [-l <loop times for tbench>] [-i <amd tracer interval>] [-m <comparative test: acpi-cpufreq>]4). Results
basic
When you finish test, you will get the following log info
$ dmesg | grep "amd_pstate_ut" | tee log.txt [12977.570663] amd_pstate_ut: 1 amd_pstate_ut_acpi_cpc_valid success! [12977.570673] amd_pstate_ut: 2 amd_pstate_ut_check_enabled success! [12977.571207] amd_pstate_ut: 3 amd_pstate_ut_check_perf success! [12977.571212] amd_pstate_ut: 4 amd_pstate_ut_check_freq success!
tbench
When you finish test, you will get selftest.tbench.csv and png images. The selftest.tbench.csv file contains the raw data and the drop of the comparative test. The png images shows the performance, energy and performan per watt of each test. Open selftest.tbench.csv :
Governor
Round
Des-perf
Freq
Load
Performance
Energy
Performance Per Watt
Unit
GHz
MB/s
J
MB/J
amd-pstate-ondemand
1
2504.05
1563.67
158.5378
amd-pstate-ondemand
2
2243.64
1430.32
155.2941
amd-pstate-ondemand
3
2183.88
1401.32
154.2860
amd-pstate-ondemand
Average
2310.52
1465.1
156.1268
amd-pstate-schedutil
1
165.329
1.62257
99.798
2136.54
1395.26
151.5971
amd-pstate-schedutil
2
166
1.49761
99.9993
2100.56
1380.5
150.6377
amd-pstate-schedutil
3
166
1.47806
99.9993
2084.12
1375.76
149.9737
amd-pstate-schedutil
Average
165.776
1.53275
99.9322
2107.07
1383.84
150.7399
acpi-cpufreq-ondemand
1
2529.9
1564.4
160.0997
acpi-cpufreq-ondemand
2
2249.76
1432.97
155.4297
acpi-cpufreq-ondemand
3
2181.46
1406.88
153.5060
acpi-cpufreq-ondemand
Average
2320.37
1468.08
156.4741
acpi-cpufreq-schedutil
1
2137.64
1385.24
152.7723
acpi-cpufreq-schedutil
2
2107.05
1372.23
152.0138
acpi-cpufreq-schedutil
3
2085.86
1365.35
151.2433
acpi-cpufreq-schedutil
Average
2110.18
1374.27
152.0136
acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil
Comprison(%)
-9.0584
-6.3899
-2.8506
amd-pstate-ondemand VS amd-pstate-schedutil
Comprison(%)
8.8053
-5.5463
-3.4503
acpi-cpufreq-ondemand VS amd-pstate-ondemand
Comprison(%)
-0.4245
-0.2029
-0.2219
acpi-cpufreq-schedutil VS amd-pstate-schedutil
Comprison(%)
-0.1473
0.6963
-0.8378
gitsource
When you finish test, you will get selftest.gitsource.csv and png images. The selftest.gitsource.csv file contains the raw data and the drop of the comparative test. The png images shows the performance, energy and performan per watt of each test. Open selftest.gitsource.csv :
Governor
Round
Des-perf
Freq
Load
Time
Energy
Performance Per Watt
Unit
GHz
s
J
1/J
amd-pstate-ondemand
1
50.119
2.10509
23.3076
475.69
865.78
0.001155027
amd-pstate-ondemand
2
94.8006
1.98771
56.6533
467.1
839.67
0.001190944
amd-pstate-ondemand
3
76.6091
2.53251
43.7791
467.69
855.85
0.001168429
amd-pstate-ondemand
Average
73.8429
2.20844
41.2467
470.16
853.767
0.001171279
amd-pstate-schedutil
1
165.919
1.62319
98.3868
464.17
866.8
0.001153668
amd-pstate-schedutil
2
165.97
1.31309
99.5712
480.15
880.4
0.001135847
amd-pstate-schedutil
3
165.973
1.28448
99.9252
481.79
867.02
0.001153375
amd-pstate-schedutil
Average
165.954
1.40692
99.2944
475.37
871.407
0.001147569
acpi-cpufreq-ondemand
1
2379.62
742.96
0.001345967
acpi-cpufreq-ondemand
2
441.74
817.49
0.001223256
acpi-cpufreq-ondemand
3
455.48
820.01
0.001219497
acpi-cpufreq-ondemand
Average
425.613
793.487
0.001260260
acpi-cpufreq-schedutil
1
459.69
838.54
0.001192548
acpi-cpufreq-schedutil
2
466.55
830.89
0.001203528
acpi-cpufreq-schedutil
3
470.38
837.32
0.001194286
acpi-cpufreq-schedutil
Average
465.54
835.583
0.001196769
acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil
Comprison(%)
9.3810
5.3051
-5.0379
amd-pstate-ondemand VS amd-pstate-schedutil
Comprison(%)
124.7392
-36.2934
140.7329
1.1081
2.0661
-2.0242
acpi-cpufreq-ondemand VS amd-pstate-ondemand
Comprison(%)
10.4665
7.5968
-7.0605
acpi-cpufreq-schedutil VS amd-pstate-schedutil
Comprison(%)
2.1115
4.2873
-4.1110