Kernel driver inspur-ipsps1

Supported chips:

  • Inspur Power System power supply unit

Author: John Wang <wangzqbj@inspur.com>

Description

This driver supports Inspur Power System power supplies. This driver is a client to the core PMBus driver.

Usage Notes

This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see How to instantiate I2C devices for details.

Sysfs entries

The following attributes are supported:

curr1_input

Measured input current

curr1_label

"iin"

curr1_max

Maximum current

curr1_max_alarm

Current high alarm

curr2_input

Measured output current in mA.

curr2_label

"iout1"

curr2_crit

Critical maximum current

curr2_crit_alarm

Current critical high alarm

curr2_max

Maximum current

curr2_max_alarm

Current high alarm

fan1_alarm

Fan 1 warning.

fan1_fault

Fan 1 fault.

fan1_input

Fan 1 speed in RPM.

in1_alarm

Input voltage under-voltage alarm.

in1_input

Measured input voltage in mV.

in1_label

"vin"

in2_input

Measured output voltage in mV.

in2_label

"vout1"

in2_lcrit

Critical minimum output voltage

in2_lcrit_alarm

Output voltage critical low alarm

in2_max

Maximum output voltage

in2_max_alarm

Output voltage high alarm

in2_min

Minimum output voltage

in2_min_alarm

Output voltage low alarm

power1_alarm

Input fault or alarm.

power1_input

Measured input power in uW.

power1_label

"pin"

power1_max

Input power limit

power2_max_alarm

Output power high alarm

power2_max

Output power limit

power2_input

Measured output power in uW.

power2_label

"pout"

temp[1-3]_input

Measured temperature

temp[1-2]_max

Maximum temperature

temp[1-3]_max_alarm

Temperature high alarm

vendor

Manufacturer name

model

Product model

part_number

Product part number

serial_number

Product serial number

fw_version

Firmware version

hw_version

Hardware version

mode

Work mode. Can be set to active or standby, when set to standby, PSU will automatically switch between standby and redundancy mode.