Kernel driver lt7182s

Supported chips:

Author: Guenter Roeck <linux@roeck-us.net>

Description

LT7182S is a Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher with Digital Power System Management support.

Usage Notes

This driver does not probe for PMBus devices. You will have to instantiate devices explicitly.

Example: the following commands will load the driver for a LT7182S at address 0x4f on I2C bus #4:

# modprobe lt7182s
# echo lt7182s 0x4f > /sys/bus/i2c/devices/i2c-4/new_device

It can also be instantiated by declaring an entry in device tree.

Sysfs attributes

curr[1-2]_label

"iin[12]"

curr[1-2]_input

Measured input current

curr[1-2]_max

Maximum input current

curr[1-2]_max_alarm

Current high alarm

curr[3-4]_label

"iout[1-2]"

curr[3-4]_input

Measured output current

curr[3-4]_highest

Highest measured output current

curr[3-4]_max

Maximum output current

curr[3-4]_max_alarm

Output current high alarm

in[1-2]_label

"vin[12]"

in[1-2]_input

Measured input voltage

in[1-2]_highest

Highest measured input voltage

in[1-2]_crit

Critical maximum input voltage

in[1-2]_crit_alarm

Input voltage critical high alarm

in[1-2]_min

Minimum input voltage

in[1-2]_min_alarm

Input voltage low alarm

in[1-2]_rated_min

Rated minimum input voltage

in[1-2]_rated_max

Rated maximum input voltage

in1_reset_history

Write to reset history for all attributes

in[3-5]_label

"vmon[1-3]"

in[3-5]_input

Measured voltage on ITH1/ITH2/EXTVCC pins Only available if enabled with MFR_ADC_CONTROL_LT7182S command.

in[3-4|6-7]_label

"vout[1-2]"

in[3-4|6-7]_input

Measured output voltage

in[3-4|6-7]_highest

Highest measured output voltage

in[3-4|6-7]_lcrit

Critical minimum output voltage

in[3-4|6-7]_lcrit_alarm

Output voltage critical low alarm

in[3-4|6-7]_min

Minimum output voltage

in[3-4|6-7]_max_alarm

Output voltage low alarm

in[3-4|6-7]_max

Maximum output voltage

in[3-4|6-7]_max_alarm

Output voltage high alarm

in[3-4|6-7]_crit

Critical maximum output voltage

in[3-4|6-7]_crit_alarm

Output voltage critical high alarm

power[1-2]_label

"pout[1-2]"

power[1-2]_input

Measured output power

temp1_input

Measured temperature

temp1_crit

Critical high temperature

temp1_crit_alarm

Chip temperature critical high alarm

temp1_max

Maximum temperature

temp1_max_alarm

Chip temperature high alarm